Sony PXW-Z190 Operating Instructions - Page 54
Connecting to the Internet, Connecting using a modem, Connecting using wireless LAN, station mode
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Connecting to the Internet You can connect the camcorder to the Internet using a modem, wired LAN, or wireless LAN. Note • The NETWORK upgrade license (option) is required to use a modem and the wired LAN function. Connecting using a modem You can connect the camcorder to the Internet via a 3G/4G network by attaching an optional modem to the unit. Attaching and using more than one modem at the same time enables high-quality streaming in network client mode, using two lines for higher quality streaming and device redundancy. For details about compatible modems, contact your Sony dealer or a Sony service representative. Notes • A modem cannot be used at the same time as a wired LAN. • A modem cannot be used when using a BP-30 battery pack. Modem and video output combinations A modem cannot be used if both of Output On/ Off (page 96) >SDI and HDMI in the Video menu are set to On. Both are set to On by default in Output On/Off. To use a modem, set either of the two outputs in Output On/Off to Off. To use a modem and wireless LAN at the same time, set all outputs in Output On/Off to Off. Note • When using a modem and video output at the same time, the brightness of the LCD screen decreases. Attaching a modem to the camcorder Attach a modem to the camcorder using one of the following methods. Attaching to the USB 2.0 (HOST) connector or USB 3.0 (HOST) connector Attach a modem that supports the USB standard of the corresponding connector. Two modems can be used simultaneously by connecting modems to both connectors. Notes • When using a modem connected to a dedicated hub, a modem connected to the USB 3.0 (HOST) connector cannot be used. • Attach/remove the modem while the camcorder is turned off. Connecting a modem to a dedicated USB hub (CBK-DL1) connected to the USB 2.0 (HOST) connector One or two modems can be connected to a dedicated USB hub connected to the USB 2.0 (HOST) connector. Notes • Attach/remove the modem and dedicated USB hub while the camcorder is turned off. • When a dedicated hub is connected, a modem connected to the USB 3.0 (HOST) connector cannot be used. Connecting to a network 1 Turn the camcorder on. 2 Set Modem >Setting in the Network menu to On. Note • It may take some time (about 1 minute) to connect to a 3G/4G network. Wait until the network status indicator (page 14) "modem" icon shows a strength of 1 or higher on the LCD/viewfinder screen. Connecting using wireless LAN station mode You can connect the camcorder to the Internet in Wi-Fi station mode via an optional wireless LAN router or by tethering to a device. 54