Sony PXW-Z190 Operating Instructions - Page 43
K & HD Sub recording, Changing the setting of the record button, and handle record button
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
during normal continuous recording, simultaneous recording and relay recording are not available. • When you start recording in 2-slot Simul Rec mode, if media is inserted in only one slot or the media in one slot is full, video is recorded only on the recordable media. To exit, stop the recording. To cancel 2-slot Simul Rec mode In recording standby mode, set Simul Rec >Setting in the Recording menu to Off. Changing the setting of the record button and handle record button You can start/stop recording on the memory card in each slot independently by using the grip record button and handle record button. The default setting starts/stops recording on memory card A and memory card B simultaneously by using either of the buttons. • Rec Button: Handle Rec Button: To change the setting Select Simul Rec >Rec Button Set in the Recording menu. Rec Button Set Rec Button: Handle Rec Button: Rec Button: Handle Rec Button: Rec Button: Handle Rec Button: Buttons and memory cards Starts/stops simultaneously recording to memory cards A and B using either button. Starts/stops recording on memory card A by using the record button, and memory card B by using the handle record button. Starts/stops recording on memory card B by using the record button, and memory card A by using the handle record button. 4K & HD (Sub) recording This function allows you to record a 4K (QFHD) video (main clip) and MPEG HD422 video (subclip), that can be used for pre-editing, simultaneously to a single memory card. Note • The MPEG HD upgrade license (option) is required to use this function. The following recording formats for memory cards are supported for 4K & HD (Sub) recording. Recording format of main clip XAVC-L 3840×2160P System Recording frequency format of subclip 29.97/25/ MPEG HD422 23.98 1920×1080P Note • Use SDXC UHS-I U3 or higher memory cards. Other types of memory cards may not record normally. Configuring before shooting Configure 4K & HD (Sub) Rec (page 102) in the Recording menu before shooting. Notes • 4K & HD (Sub) Rec cannot be set to On at the same time as, S&Q Motion Interval Rec, Picture Cache Rec, Clip Continuous Rec, 2-slot Simul Rec, or Proxy Rec. When 4K & HD (Sub) Rec is set to On, these other recording modes are forcibly set to Off. • The 4K & HD (Sub) recording function cannot be set during recording, playback, or while the thumbnail screen is displayed. • The 4K & HD (Sub) recording function cannot be used when the system frequency is set to 59.94 or 50. Set to 29.97, 25, or 23.98. Recording in 4K & HD (Sub) recording mode Start the recording after completing the required setting. Press the record button. During recording, "XAVC-L/Sub" is displayed on the right of the recording format (codec) indicator on the screen. To exit, stop the recording. To cancel 4K & HD (Sub) recording mode In recording standby mode, set 4K & HD (Sub) >Setting in the Recording menu to Off. 43