Sony PXW-Z190 Operating Instructions - Page 17
Rec Button Settings Status screen, GPS Status screen, Network Status screen, Wireless LAN settings
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Media B remaining recording time UTILITY media information UTILITY media protection UTILITY media remaining capacity meter UTILITY media remaining capacity Displays an estimate of the remaining recording time of the recording media inserted in slot B in units of minutes under the current recording conditions. Displays the media icon when media is inserted in the UTILITY SD/MS slot. Displays the lock icon when the media inserted in the UTILITY SD/MS slot is protected (locked). Displays the remaining capacity of media inserted in the UTILITY SD/MS slot expressed as a percentage on a bar graph. Displays an estimate of the remaining recording time of the recording media inserted in the UTILITY SD/MS slot in units of minutes. Or displays the remaining capacity in units of GB. Rec Button Settings Status screen Displays the setting status of the record button and handle record button. Rec Button Handle Rec Button Displays the recording target slot of the record button Displays the recording target slot of the handle record button GPS Status screen Displays the GPS positioning status and information. GPS Dilution of Precision Latitude Longitude Altitude Positioning date and time Current date and time Time Zone GPS signal positioning status Position information precision Latitude information Longitude information Altitude information Positioning date and time Current date and time Time zone setting Network Status screen Displays the connection status of the network connection. Wired LAN, Modem1, and Modem2 are displayed when the NETWORK upgrade license (option) is installed. Wireless LAN Wired LAN Modem1 Modem2 Wireless network settings, connection status Wired LAN network settings, connection status Wireless network settings, connection status using modem (sold separately) Wireless network settings, connection status using modem (sold separately) Wireless LAN settings Setting display Off Status display --- Access Point Non Active Mode Active Station Mode Non Active Searching Disconnected Description Wireless LAN setting is off. Not operating as an access point. Displayed when Wi-Fi chip fails. Operating as an access point. Not operating in station mode. Displayed when Wi-Fi chip fails. Attempting to connect to the previously connected network (access point). Not connected to a network (access point). Also displayed when IP address was not assigned using DHCP. Connected to network (access point). 17