Sony PXW-Z190 Operating Instructions - Page 33
Setting the audio to record, Using the internal microphone, Using an external audio device
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4 Press the WB SET button A. When you execute the adjustment in a memory mode, the adjusted value is stored in the memory (A or B) selected in step 1. If auto white balance is executed in ATW mode, the white balance adjustment returns to the ATW mode white balance when adjustment ends. Notes • Auto white balance adjustment cannot be performed when in Preset mode. • If the adjustment is not successful, an error message is displayed on the screen. If the error message persists after repeated attempts to set white balance, contact your Sony service representative. Setting the audio to record The following connectors, switches and dials allow you to set the sound to be recorded. External audio input connectors and selector switches AUDIO INPUT1 connector A AUDIO INPUT2 connector B INPUT1 switch C INPUT2 switch H Audio source switches CH1 (INT/EXT/MI SHOE) switch D CH2 (INT/EXT/MI SHOE) switch G Switches for setting the audio level AUDIO LEVEL (CH1) dial E AUDIO LEVEL (CH2) dial F Refer to the block diagrams (page 151). Using the internal microphone You can record sound using the internal microphone. To record on CH1, CH2 Set the CH1 (INT/EXT/MI SHOE) switch D and CH2 (INT/EXT/MI SHOE) switch G to INT. To record on CH3, CH4 Select Internal MIC using Audio Input (page 94) >CH3 Input Select and CH4 Input Select in the Audio menu. Using an external audio device Mixers and other external audio devices are supported. To record on CH1, CH2 1 Set the CH1 (INT/EXT/MI SHOE) switch D and CH2 (INT/EXT/MI SHOE) switch G to EXT. When Audio Input >CH2 EXT Input Select in the Audio menu is set to INPUT2, the sound from the AUDIO INPUT1 connector will be recorded on CH1 and the sound from the AUDIO INPUT2 connector will be recorded on CH2. When CH2 EXT Input Select is set to INPUT1, the sound from the AUDIO INPUT1 connector will be recorded on both CH1 and CH2. 2 Set the INPUT1/INPUT2 switches (C/ H) to LINE. 3 Connect an external audio device to the AUDIO INPUT1/AUDIO INPUT2 connectors (A/B). 33