Sony PXW-Z190 Operating Instructions - Page 41

To cancel Clip Continuous Rec mode In recording standby mode, set Clip Continuous Rec (page 101) >Setting in the Recording menu to Off, or press an assignable button assigned with Clip Continuous Rec. Limitations A single continuous clip cannot be created if you perform one of the following operations while the camcorder is recording or in recording standby mode. A new clip will be created when you next start recording. • Operate on a clip (lock, delete, or rename a clip) • Change the memory card slot • Change the recording format • Set the ON/STANDBY switch to STANDBY • Display the thumbnail screen • Play a clip • Cancel Clip Continuous Rec mode Picture cache recording (Picture Cache Rec) The camcorder always maintains a cache of video and audio data for a set interval (maximum of 24 seconds) in internal storage memory when shooting, allowing you to record several seconds of footage before actually starting to record. Picture Cache Rec mode can be used when the recording format (page 113) is set to one of the formats listed below. • XAVC-L • MPEG HD422 1) • MPEG HD420 1) 1) Available when the MPEG HD upgrade license (option) is installed. Notes • Picture Cache Rec cannot be set to On at the same time as S&Q Motion, Interval Rec, Clip Continuous Rec, 2-slot Simul Rec, Proxy Rec, or 4K & HD (Sub) Rec (when MPEG HD upgrade license (option) is installed). When Picture Cache Rec is set to On, these other recording modes are forcibly set to Off. • Picture Cache Rec mode cannot be selected while recording or Rec Review is in progress. • When Picture Cache Rec is set to On, the timecode is recorded in Free Run mode regardless of the setting in the TC/UB menu (page 100). Configuring before shooting Configure Picture Cache Rec (page 101) in the Recording menu before shooting. When Setting is set to On, Picture Cache Rec is activated and "Cache" appears on the screen. Configuring using assignable buttons Assign Picture Cache Rec to an assignable button (page 38), and switch the function On/Off by pressing the button. Recording in Picture Cache Rec mode Start the recording after completing the required setting. Press the record button. When you start recording, the "Cache" indication changes to "zRec." To exit, stop the recording. To cancel Picture Cache Rec mode Set Picture Cache Rec >Setting in the Recording menu to Off, or press an assignable button assigned with Picture Cache Rec. Notes • Changing the recording format clears the video in cache memory stored up to that point, and starts caching new video. Consequently, picture cache recording of pictures before changing format is not possible if you start recording immediately after changing format. • If Picture Cache Rec is started or stopped immediately after inserting a memory card, cache data may not be recorded on the card. • Video is stored in cache memory when Picture Cache Rec mode is set to On. Video prior to the function being set to On is not cached. • Video is not stored in cache memory while a memory card is being accessed, such as during playback, Rec Review, or thumbnail screen display. Picture cache recording of video during that interval is not possible. • When a Multi Interface Shoe compatible video light is attached, cache recording prior to starting to record is not possible, even if Video Light Set in the Camera menu is set to Rec Link or Rec Link + Stby. The light turns on/off when you press the record button. Slow & Quick Motion When the file system is exFAT and the recording format (page 113) is set to one of the formats listed below, you can specify a recording frame rate that is different from the playback frame rate. Recording format XAVC-L 1080P XAVC-L 2160P System frequency 59.94/29.97/ 23.98/50/25 59.94/50 S&Q frame rate 1 to 60 fps (1 FPS units) 41