Sony PXW-Z190 Operating Instructions - Page 58
Selecting a file and uploading, Uploading proxy files, automatically, the thumbnail screen
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Selecting a file and uploading Upload a file that is recorded on an SD card or an original file that is recorded on a memory card to a server. Files can also be uploaded via web remote control. For details, see "Transferring files (Slot A, Slot B, Slot SD/MS)" (page 67). Uploading a proxy file on an SD card from the thumbnail screen 1 Select Transfer Clip (Proxy) >Select Clip in the Thumbnail menu. The display changes from the setup menu to the thumbnail screen. Clips can be transferred from the thumbnail screen or the filtered clip thumbnail screen. 2 Select the file (clip) to transfer using the V/v/B/b button or SEL/SET dial, and press the SET button or SEL/SET dial. A check mark is attached to the selected clip. 3 Press the MENU button. A confirmation screen appears. 4 Select Execute. The transfer of the selected file is registered in the job list, and the registration result is displayed. 5 Select OK. To upload all files Select All Clips instead of Select Clip in step 1 to transfer the proxy files corresponding to all the files. Note • Up to 200 files can be transferred. Uploading an original file on a memory card from the thumbnail screen 1 Select Transfer Clip >Select Clip in the Thumbnail menu. The display changes from the setup menu to the thumbnail screen. Clips can be transferred from the thumbnail screen or the filtered clip thumbnail screen. 2 Select the file to transfer using the V/v/ B/b button or SEL/SET dial, and press the SET button or SEL/SET dial. A check mark is attached to the selected clip. 3 Press the MENU button. A confirmation screen appears. 4 Select Execute. The transfer of the selected file is registered in the job list, and the registration result is displayed. 5 Select OK. To upload all files Select All Clips instead of Select Clip in step 1 to transfer all the files. Note • Up to 200 files can be transferred. Checking the file transfer You can check the file transfer on the screen displayed by selecting File Transfer >View Job List in the Network menu. You can check the upload status on the Job List screen that is displayed by tapping Job List on the SD Card, Slot A, or Slot B screen (page 68). Notes • Up to 200 transfer jobs can be registered. • The job list is retained when the camcorder is turned off, but up to 10 minutes of recent progress information may be lost if the battery pack is removed or the camcorder is powered off without first setting the ON/STANDBY switch to STANDBY. • Jobs added after the battery low voltage state are not saved in the job list. • If an error occurs during file transfer, the transfer of a clip with the same name as a transferred clip may not be resumed depending on the settings and status of the transfer destination server. In this case, check the transfer destination server settings and status. Uploading proxy files automatically If File Transfer >Auto Upload (Proxy) in the Network menu is set to On, Proxy Rec >Setting in the Recording menu is set to On, and a network connection exists, then proxy files are automatically uploaded to the transfer destination 58