Sony PXW-Z190 Operating Instructions - Page 22
Setting the Clock, Attaching Devices, Attaching the lens hood, Attaching the large eyecup - release date
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting the Clock Attaching Devices When you turn the camcorder on for the first time after purchasing or the backup battery has completely discharged, the initial setting display appears on the viewfinder screen and LCD screen. Set the date and time of the internal clock using this screen. Time Zone The value shows the time difference from UTC (Coordinated Universal Time). Change the setting as required. Setting the date and time Move the cursor using the V/v/B/b button (page 9) or SEL/SET dial (page 10), and press the SET button or SEL/SET dial to set each item. Finally, move the cursor to [Finish] and press the SET button or SEL/SET dial to close the settings screen and finish setting the clock. Once the settings screen is closed, you can change the date, time, and time zone settings using Clock Set (page 116) in the System menu. Notes • If the clock setting is lost because the backup battery becomes fully discharged due to power being disconnected for an extended period (no battery pack and no DC IN power source), the initial settings screen will be displayed when you next turn the camcorder on. • While the initial settings screen is displayed, no other operation, except turning the power off, is permitted until you finish the settings on this screen. • If you do not use your camcorder for about 3 months, the built-in rechargeable battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the rechargeable battery and then set the date and time again (page 123). Attaching the lens hood PUSH (lens hood release) button Align the marks on the lens hood to those on the camcorder, and turn the lens hood in the direction of the arrow 2 until it is locked. Removing the lens hood Turn the lens hood in the opposite direction of the arrow in the illustration while pressing the PUSH (lens hood release) button. Note • Remove the lens hood when you attach/detach an ø82 mm polarizing filter or protective filter. Attaching the large eyecup Stretch the large eyecup slightly and fit it over the groove on the viewfinder. Large eyecup (supplied) 22