Sony PXW-Z190 Operating Instructions - Page 23
Adjusting the Screens, Adjusting the viewfinder, Adjusting the brightness of
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Adjusting the Screens Adjusting the LCD screen Open the LCD screen 180 degrees (1), then rotate it to the best angle to record or play back (2). 1 Open 180 degrees 2 90 degrees (max.) 2 180 degrees (max.) You can adjust the angle so that the viewfinder is facing the subject. Images are displayed as mirror images on the LCD screen, but are recorded as normal images. Adjusting the backlight Switch the brightness of the backlight using the LCD BRIGHT button (page 11). Adjusting the brightness Adjust the brightness using LCD Setting >Brightness (page 96) in the LCD/VF menu. Changes in the brightness do not affect the brightness of recorded images. Adjusting the viewfinder Look through the viewfinder with the LCD screen closed when using the viewfinder. If the viewfinder screen display is not clear, adjust it using the diopter adjustment dial below the viewfinder. Diopter adjustment dial Move it until the picture becomes clear. Adjusting the brightness Adjust the brightness using VF Setting >Brightness (page 96) in the LCD/VF menu. Note • When you move your eyes away from the viewfinder, the screen colors may be temporarily inverted to prevent screen burn-in, but this is not a malfunction. Adjusting the brightness of the LCD/viewfinder screen using an assignable button You can display a level bar for adjusting the brightness of the LCD screen/viewfinder screen by assigning LCD/VF Adjust to an assignable button (page 38) beforehand and then pressing that button. 1 Press the button assigned with LCD/VF Adjust to display a level bar for adjusting the brightness. Each time the button is pressed, the display switches in sequence between level bar for the LCD screen t level bar for the viewfinder t no display. 2 Adjust the level using the V/v/B/b button or SEL/SET dial, and press the SET button or SEL/SET dial. The level bar disappears. Press the button assigned with LCD/VF Adjust or do not perform any operation for 3 seconds to hide the level bar. 23