Sony PXW-Z190 Operating Instructions - Page 77
HDD/USB media, Formatting initializing an external
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2 Select the copy destination folder from the folder list, and press the SET button or SEL/SET dial. You can also select New on the screen to create a new folder. Note • If a folder is not specified, a folder is automatically created with a folder name the same as the creation date of the first clip to be copied, and clips are copied to that folder. 3 Select USB >Copy to USB (page 104) in the Media menu, insert the target recording media to copy, and select the memory card slot. Media(A) to USB: Copy all clips from the recording media inserted in slot A. Media(B) to USB: Copy all clips from the recording media inserted in slot B. Media(A)(B) to USB: Copy all clips from the recording media inserted in slot A and slot B. Note • When a copy destination folder is specified in step 2 and Media(A)(B) to USB is selected, slot A clips are copied to the specified destination folder. Slot B clips are copied to a folder that is automatically created with a folder name the same as the creation date of the first clip. 4 Select Execute using the V/v/B/b button or SEL/SET dial, and press the SET button or SEL/SET dial. All clips on the target recording media are copied to the USB media. Note • If a clip with the same file name as the clip to copy already exists in the destination folder, the clip is not copied. Displaying a list of clips on an external HDD/USB media You can display a list of the clips on an external HDD/USB media using USB >View Clip List (page 104) in the Media menu. Renaming a folder on an external HDD/ USB media 1 Select USB >Rename Folder (page 104) in the Media menu. 2 Select the folder to rename from the folder list, and press the SET button or SEL/SET dial. A file name input screen appears. 3 Enter a folder name, and select Done. The folder is renamed. Checking for copy read errors You can check for read errors after writing clips by setting USB >Error Check (page 104) in the Media menu to On. Formatting (initializing) an external HDD/USB media 1 Select USB >Format USB (page 104) in the Media menu. 2 Select Execute using the V/v/B/b button or SEL/SET dial, and press the SET button or SEL/SET dial. Initialization (formatting) begins. 3 When the formatting is completed, a message appears. Select OK. Checking the remaining capacity on an external HDD/USB media The free space on an external HDD/USB media is displayed in the Media Remain row on the screen displayed when USB in the Media menu is selected. About power supply to an external HDD/ USB media Power is supplied to an external HDD/USB media from the USB 3.0 (HOST) connector automatically when performing an operation in the USB menu item in the Media menu. However, power supply is not started under the following conditions, even when performing an operation in the USB menu item in the Media menu. To start the supply of power, perform the solution shown in the table. 77