Sony PXW-Z190 Operating Instructions - Page 46
Proxy Recording, Supported SD cards, Formatting initializing SD cards
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3 3 3 Typhoon_Strikes 3 3 3 Notes • When you create a file, enter each statement as a single line by breaking a line with a carriage return only after the last character of the line, and do not enter spaces except where specified with "sp." • A string of up to 44 bytes (or 44 characters) is valid as a clip name. If the UTF-8 format string exceeds 44 bytes, the first 44 bytes are used as the clip name. If only a string in ASCII format is specified, the ASCII format name up to the 44th character is used as the clip name. When neither the ASCII format name string nor UTF8-format name string is valid, a clip name in the standard format is used. Using a clip name defined in planning metadata Load a planning metadata file that contains the clip name into the memory of the camcorder, then select Clip Naming (page 105) >Auto Naming >Plan in the Media menu. Clip names are generated by adding an underscore (_) and a 5-digit serial number (00001 to 99999). Example: Typhoon_Strikes_00001, Typhoon_Strikes_00002, ... Notes • If the serial number reaches 99999, it returns to 00001 upon the next recording. • When you load another planning metadata file, the 5-digit serial number returns to 00001. Proxy Recording You can record proxy data on an SD card in the UTILITY SD/MS slot simultaneously while recording to the memory cards in the memory card slots. Supported SD cards SDXC memory cards* (Speed Class: 4 or higher) SDHC memory cards* (Speed Class: 4 or higher) SD memory cards* (Speed Class: 4 or higher) * Referred to as "SD card" in this document. Formatting (initializing) SD cards SD cards must be formatted the first time they are used in the camcorder. SD cards for use in the camcorder should be formatted using the format function of the camcorder. If a message appears when the SD card is inserted into the camcorder, format the SD card. 1 Insert the SD card media into the UTILITY SD/MS slot (page 9) with the label facing right. 2 Select Format Media (page 104) >Utility SD/MS >Execute in the Media menu. When a confirmation message appears, select Execute again. A message and progress status are displayed while formatting is in progress, and the access lamp is lit red. When formatting is completed, a completion message is displayed. Press the SET button or SEL/SET dial to dismiss the message. Notes • Formatting an SD card erases all data on the card. The card cannot be restored. • SDXC cards are formatted in exFAT, SDHC cards are formatted in FAT32, and SD cards are formatted in FAT. 46