Sony PXW-Z190 Operating Instructions - Page 70
Playing Clips, Playing recorded clips, Playing the selected and, subsequent clips in sequence
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Playing Clips Playing recorded clips You can play recorded clips when the camcorder is in recording standby (Stby) mode. 1 Insert a memory card for playback. 2 Press the PLAY/PAUSE button of the playback control buttons. 3 Search for the desired clip by pressing the PREV or NEXT button. 4 Press the PLAY/PAUSE button. The playback image appears on the viewfinder. You can control playback by pressing the following buttons. PLAY/PAUSE button: Pauses playback. To resume playback, press this button again. F FWD button/F REV button: Plays fast. To return to normal playback, press the PLAY/ PAUSE button. STOP/CAM button: Stops playback or recording. To select the first thumbnail Press and hold the F REV button and press the PREV button. To select the last thumbnail Press and hold the F FWD button and press the NEXT button. Notes • There may be momentary picture breakup or still image display at the boundary between clips. You cannot operate the camcorder during this period. • When you select a clip in the thumbnail screen and begin playback, there may be momentary picture breakup at the start of the clip. To start playback without distortion, pause playback once after starting it, press the PREV button of the playback control buttons to return to the top of the clip, then restart playback. Monitoring audio during playback In normal playback mode, you can monitor the recorded audio signals through the built-in speaker or connected headphones. Connecting a set of headphones to the headphone jack (page 10) cuts off the built-in speaker. Adjust the volume using the VOLUME buttons (page 11). You can select the channel to monitor using Audio Output (page 95) in the Audio menu. Playing the selected and subsequent clips in sequence 1 Press the V/v/B/b button or turn the SEL/SET dial to move the cursor to the thumbnail for the clip you want to play. 2 Press the SET button or SEL/SET dial. Playback begins from the start of the selected clip. 70