Sony PXW-Z190 Operating Instructions - Page 51

Connecting to an access point using auto, network detection or manually

Get Sony PXW-Z190 PDF manuals and user guides View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

5 Press the WPS button of the access point. For details about the operation of the WPS button, refer to the operating instructions of the access point. When the connection is successful, the network status indicator icon will show a strength of 1 or higher on the LCD/ viewfinder screen. Note • If the connection fails, perform steps from step 1 again. 6 Connect the device to the access point. For details about connecting, refer to the operating instructions of the device. 7 Display the web remote control (page 64). Or connect using the Content Browser Mobile application. Connecting to an access point using auto network detection or manually You can configure connection to a desired access point from the setup menu. You can configure connection to a desired access point using the auto network detection function. Connecting using the network auto detection function 1 Perform steps 1 to 3 in "Connecting to an access point using WPS" (page 50). 2 Select ST Mode Settings >Scan Networks (page 108) >Execute in the Network menu. The camcorder starts detection of connection destinations. Detected destinations for connection are displayed in the Scan Networks result list. 3 Select a connection using the V/v/B/b button or SEL/SET dial, and press the SET button or SEL/SET dial. Momentarily, the network (access point) details screen appears. The selected connection is displayed in SSID. 4 Select Password, and set the password on the password input screen. Selecting an SSID in the connection history automatically configures settings, including the password. Set the password to return to the network (access point) details screen. 5 Configure the following connection settings. • DHCP Set the DHCP setting. When you set to On, the IP address is assigned to the camcorder automatically. To assign the IP address to the camcorder manually, set to Off. • IP Address Input the IP address of the camcorder. This setting is available only when DHCP is set to Off. • Subnet Mask Input the subnet mask of the camcorder. This setting is available only when DHCP is set to Off. • Gateway Input the default gateway for the access point. This setting is available only when DHCP is set to Off. • DNS Auto Set to acquire DNS automatically. When set to On, the DNS server address is automatically acquired. This setting is available only when DHCP is set to On. • Primary DNS Server Input the primary DNS server for the access point. This setting is available only when DNS Auto is set to Off. • Secondary DNS Server Input the secondary DNS server for the access point. This setting is available only when DNS Auto is set to Off. 6 When finished, select Connect to connect to the access point. Connecting manually 1 Perform steps 1 to 3 in "Connecting to an access point using WPS" (page 50). 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
51
5
Press the WPS button of the access
point.
For details about the operation of the WPS
button, refer to the operating instructions of
the access point.
When the connection is successful, the
network status indicator icon will show a
strength of 1 or higher on the LCD/
viewfinder screen.
Note
•
If the connection fails, perform steps from step 1 again.
6
Connect the device to the access point.
For details about connecting, refer to the
operating instructions of the device.
7
Display the web remote control
(page 64)
. Or connect using the Content
Browser Mobile application.
Connecting to an access point using auto
network detection or manually
You can configure connection to a desired access
point from the setup menu.
You can configure connection to a desired access
point using the auto network detection function.
Connecting using the network auto detection
function
1
Perform steps 1 to 3 in
“Connecting to
an access point using WPS” (page 50)
.
2
Select ST Mode Settings >Scan
Networks
(page 108)
>Execute in the
Network menu.
The camcorder starts detection of connection
destinations.
Detected destinations for connection are
displayed in the Scan Networks result list.
3
Select a connection using the
V
/
v
/
B
/
b
button or SEL/SET dial, and press the
SET button or SEL/SET dial.
Momentarily, the network (access point)
details screen appears. The selected
connection is displayed in SSID.
4
Select Password, and set the password
on the password input screen.
Selecting an SSID in the connection history
automatically configures settings, including
the password.
Set the password to return to the network
(access point) details screen.
5
Configure the following connection
settings.
• DHCP
Set the DHCP setting.
When you set to On, the IP address is
assigned to the camcorder automatically.
To assign the IP address to the camcorder
manually, set to Off.
•
IP Address
Input the IP address of the camcorder. This
setting is available only when DHCP is set
to Off.
• Subnet Mask
Input the subnet mask of the camcorder.
This setting is available only when DHCP
is set to Off.
• Gateway
Input the default gateway for the access
point.
This setting is available only when DHCP
is set to Off.
•
DNS Auto
Set to acquire DNS automatically.
When set to On, the DNS server address is
automatically acquired. This setting is
available only when DHCP is set to On.
• Primary DNS Server
Input the primary DNS server for the
access point.
This setting is available only when DNS
Auto is set to Off.
•
Secondary DNS Server
Input the secondary DNS server for the
access point.
This setting is available only when DNS
Auto is set to Off.
6
When finished, select Connect to
connect to the access point.
Connecting manually
1
Perform steps 1 to 3 in
“Connecting to
an access point using WPS” (page 50)
.