Sony PXW-Z190 Operating Instructions - Page 44
High dynamic range HDR, recording, Acquiring location information, Setting the dynamic range
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
High dynamic range (HDR) recording You can set the imaging to High Dynamic Range (HDR) mode to record and output images with BT.2020 equivalent color space and increased dynamic range. The High Dynamic Range function is enabled when the file system is exFAT. Note • Not supported for DVCAM file formats. Setting the dynamic range Set Base Setting (page 113) >Shooting Mode in the System menu to HDR to set high dynamic range mode. HLG type settings You can set the HLG type when high dynamic range mode is selected. For details, see (page 89). Gamma display assist function setting The LCD/viewfinder screen of the camcorder are not HDR compatible, and are not suitable for HDR display. Accordingly, the display can be made more visible for easier shooting using the gamma display assist function. You can change the setting of the gamma display assist function using Gamma Display Assist (page 98) in the LCD/VF menu. Note • The gamma display assist function is used only for the LCD/viewfinder screen. The settings are not applied to the recorded image or output image. Acquiring location information (GPS) Location and time information of video shot when positioning is enabled is recorded onto media loaded in the card slot of the camcorder, and can be output as SDI. 1. Press the MENU button during standby. 2. Set GPS to On in the System menu. is displayed when the camcorder is seeking GPS satellites. When positioning is established, location information is recorded when shooting video. Note • The icon displayed varies, depending on the signal reception from the GPS satellites. Positioning Display GPS reception state status Off No display GPS is set to Off or an error occurred. Positioning not available Location information could not be obtained because GPS signal could not be received. Move to a location with a clear view of the sky. Searching for satellites Positioning Searching for satellites. Several minutes may be required to acquire satellites. A weak GPS signal is being received. A GPS signal is being received. Location information can be acquired. A strong GPS signal is being received. Location information can be acquired. • GPS is set to On by default. Location and time information of video shot when positioning is enabled is recorded by the camcorder. To stop recording of information, set GPS to Off. • It may take time to start positioning after turning the camcorder on. • If a positioning icon is not displayed after several minutes, there may be a problem with signal reception. Start shooting without location information, or move to an area with a clear view of the sky. Shooting when a positioning icon is not displayed means that location information will not be recorded. • The GPS signal may not be received when indoors or near tall structures. Move to a location with a clear view of the sky. • The recording of location information may be interrupted, depending on the strength of the received signal, even if a positioning icon is displayed. 44