Sony PXW-Z190 Operating Instructions - Page 57
Uploading a File, Preparations
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Uploading a File You can upload a proxy file or original file that is recorded on the camcorder to a server on the Internet or a server on a local network via a 3G/ 4G network or access point. Note • The NETWORK upgrade license (option) is required to use this function. Preparations Connecting to a network Connect the camcorder to the Internet or local network as described in "Connecting to the Internet" (page 54). Registering a file transfer destination Register the server for uploading in advance. 1 Select File Transfer >Server Settings1 (or Server Settings2, Server Settings3) in the Network menu. The transfer destination setup screen appears. 2 Set each item on the transfer destination setup screen. Display Name Enter the name of the server to display in the transfer destination list. Service Displays the server type. "FTP": FTP server Host Name Enter the address of the server. Port Enter the port number of the server to connect. User Name Enter the user name. Password Enter the password. Passive Mode Turn passive mode on/off. Destination Directory Enter the name of the directory on the destination server. Notes • When editing, "s" indicates characters that cannot be changed. Correct operation is not guaranteed when editing a directory name that contains these characters. If you need to edit, delete all the characters and re-enter a value. • If characters that are invalid on the destination server are entered in Destination Directory, files will be transferred to the user's home directory. Invalid characters will vary depending on the server. Using Secure Protocol Set whether to perform secure FTP uploading. Root Certificate Load/clear a certificate. • Load Select Set in step 3, and import a CA certificate. * The certificate to be loaded must be in PEM format, and should be written to the root directory of the SD card with "certification.pem" file name. • Clear Select Set in step 3, and clear a CA certificate. • None Do not load or clear a certificate. Notes • Set the clock of the camcorder to the correct time before importing a CA certificate. • In low voltage state, Load/Clear cannot be selected for a CA certificate. Root Certificate Status Displays the load status of the certificate. Reset Reset the settings of Server Settings to the defaults. 3 When finished, select Set to apply the settings. Always select Set after changing the settings. The settings are not applied if Set is not selected. You can also register a server using the web remote control "Registering a destination server" (page 66). 57