Sony PXW-Z190 Operating Instructions - Page 60
Starting streaming, Network client mode, Set Streaming >Setting in the Network
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Audio Channel Select the audio channels for the streaming output. • CH1/CH2 • CH3/CH4 • CH1 • CH2 • CH3 • CH4 Note • The Audio Channel settings that can be selected are restricted according to the Streaming Format setting. Destination Address Enter the address of the destination server for streaming data. Destination Port Enter the port number of the destination server used for streaming. Reset Reset the settings of Destination Settings to the defaults. 3 When finished, select Set to apply the settings. Always select Set after changing the settings. The settings are not applied if Set is not selected. 4 Select Streaming >Destination Select in the Network menu, and then select the destination settings (Destination Settings1, Destination Settings2, Destination Settings3) specified in steps 1 to 3. Starting streaming 1 Connect the camcorder to the Internet or local network as described in "Connecting to the Internet" (page 54) or "Connecting to Other Devices via LAN" (page 48). 2 Set Streaming >Setting in the Network menu to On. Streaming starts according to the settings. You can also start streaming by assigning the Streaming function to an assignable button (page 38) and pressing the button. Notes • Streaming cannot be started under the following menu settings. When Network Client Mode >Setting in the Network menu is set to On When Rec Format >Codec in the System menu is set to DVCAM(MXF) When S&Q Motion >Setting in the Recording menu is set to On When Interval Rec >Setting in the Recording menu is set to On When Simul Rec >Setting in the Recording menu is set to On • It may take several tens of seconds to stream actual video or audio after starting streaming. • If the streaming transmission destination setting is invalid or the camcorder does not connect to the network, "×" appears on the screen as the streaming status indicator. • Audio/video data is transmitted as-is via the Internet. Accordingly, the data may be disclosed to other parties. Check that the streaming data is being received by the receiving device. Data may be transmitted to a third party if the address or other settings are configured incorrectly. • Not all frames may be played, depending on the status of the network. • The picture quality may deteriorate in scenes with excessive motion. • Not all frames may be played when the stream is set to a large size with a small bit rate. To reduce this, select a smaller size format for the Streaming Format setting. • Starting streaming while monitoring will stop the monitoring. • File transfer is not supported during streaming. File transfer is supported after stopping streaming. • If streaming is started during file transfer, the file transfer stops. File transfer restarts after stopping streaming. • During streaming, the screen information update frequency is reduced, but this does not affect operation. Stopping streaming Set Streaming >Setting in the Network menu to Off. Streaming stops. You can also stop streaming by pressing an assignable button assigned with the Streaming function. Network client mode High-quality streaming is supported by enabling network client mode and connecting a Sony Network RX Station (option) as a Connection 60