Sony SDM-N80 Operating Instructions (primary manual) - Page 17
Resetting the adjustments (RESET), Additional settings, Resetting all of the adjustment data for all - system connector
![]() |
View all Sony SDM-N80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Resetting the adjustments (RESET) 1 Light up the characters and icons to indicate the functions of the keys. Touch any one of the MENU, M(+)/m(-), 8 (brightness), 6 (contrast), or INPUT keys to light up the characters and icons indicating the functions of the keys. 2 Touch the MENU key. The main menu appears on the screen. 3 Touch the M(+)/m(-) keys to select 0 (RESET) and touch the OK key. The RESET menu appears on the screen. Reset the settings according to the following instructions. x Resetting the adjustment data most appropriately for the current input signal (Analog RGB signals only) Touch the M(+)/m(-) keys to select SCREEN RESET and touch the OK key. The automatic picture quality adjustment function of this monitor automatically adjusts the picture position, phase, and pitch to the most appropriate value. The RESET menu disappears after the adjustment data is reset. x Resetting all of the adjustment data for all input signals Touch the M(+)/m(-) keys to select ALL RESET and touch the OK key. The setting of the LANGUAGE is retained. The RESET menu disappears after the adjustment data is reset. x To cancel resetting Touch the M(+)/m(-) keys to select OK key. and touch the The RESET menu returns to the main menu without resetting the adjustment data. Additional settings You can adjust the following menus: • USB SELECT • AUDIO SELECT • BACKLIGHT • LIGHT SENSOR • USER SENSOR • POWER SAVE • LANGUAGE • MENU LOCK 1 Light up the characters and icons to indicate the functions of the keys. Touch any one of the MENU, M(+)/m(-), 8 (brightness), 6 (contrast), or INPUT keys to light up the characters and icons indicating the functions of the keys. 2 Touch the MENU key. The main menu appears on the screen. 3 Touch the M(+)/m(-) keys to select m. Other menu icons appear on the menu screen. 4 Touch the M(+)/m(-) keys to select the desired menu and touch the OK key. Adjust the selected menu according to the following instructions. GB x Setting the USB upstream input This monitor is equipped with two USB upstream connectors. The effective upstream input switches depending on this menu setting. Touch the M(+)/m(-) keys to select (USB SELECT) and touch the OK key. Then touch the M(+)/m(-) keys to select the desired mode. • AUTO: To select upstream input via either connector by switching with the INPUT key • INPUT1: To select upstream input via the USB connector among the INPUT1 connectors • INPUT2: To select upstream input via the USB connector among the INPUT2 connectors Notes • When you set this menu to INPUT1 or INPUT2, the upstream input does not switch even if the video input is switched with the INPUT key. If you want to link the upstream input to switching with the INPUT key, set the menu to AUTO. • When you connect devices that require prolonged data communication with the computer, such as a printer or a scanner, to a downstream connector on this monitor, set this menu to INPUT1 or INPUT2. Otherwise, the data communication with the computer may be interrupted each time you touch the INPUT key and a failure of the printing or scanning may occur. 17
![](/manual_guide/products/sony-sdmn80-operating-instructions-primary-manual-47461dc/17.png)