Sony SDM-N80 Operating Instructions (primary manual) - Page 6
Media engine, USB Universal Serial Bus upstream connectors - media engine cable
![]() |
View all Sony SDM-N80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Media engine Rear Front AC IN INPUT 1 AUDIO IN INPUT 2 ANALOG DIGITAL AUDIO IN SYSTEM CONNECTOR (TO DISPLAY) * qg AC IN connector (page 8) This connector provides AC power to the monitor. qh HD15 (analog RGB) input connector (INPUT1) (page 7) This connector inputs analog RGB video signals (0.700 Vp-p, positive) and SYNC signals. qj DVI-I (digital/analog RGB) input connector (INPUT2) (page 7) This connector inputs analog RGB video signals (0.700 Vp-p, positive) with sync signals or digital RGB video signals that comply with DVI Rev. 1.0. You can switch between digital RGB signals and analog RGB signals with the digital/analog select switch wa. qk SYSTEM CONNECTOR (TO DISPLAY) (page 8) This connector outputs signals to the display when the display and the media engine are connected with a system connecting cable. ql AUDIO IN jacks (pages 8, 18) These jacks input audio signals when connected to the audio output jack of the computer or other audio equipment. w; USB (Universal Serial Bus) upstream connectors (pages 9, 17) These connectors are used to connect the monitor to USB compliant computers. wa Digital/analog select switch (page 7) When connecting the DVI-I input connector qj to a computer equipped with an HD15 (analog RGB) output connector using the DVI-HD15 (analog RGB) video signal cable (supplied), set this switch to ANALOG. When connecting it to a computer equipped with a DVI (digital RGB) output connector using a DVI-DVI (digital RGB) video signal cable (not supplied), set this switch to DIGITAL. The switch is set to ANALOG as the default setting. ws AC power switch (page 8) This switch turns the monitor on and off. wd AC power indicator (page 19) This indicator lights up in green when the media engine is turned on. The indicator lights up in red when the display is turned off with the media engine on. The indicator lights up in orange when the monitor is in the power saving mode. * This connector is used by service personnel only. Do not connect anything to this outlet. 6
![](/manual_guide/products/sony-sdmn80-operating-instructions-primary-manual-47461dc/6.png)