TP-Link T1500G-8T T1500G-10PSUN V1 User Guide - Page 131
Voice VLAN
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
The following entries are displayed on this screen: Storm Control Config UNIT:1/LAGS: Select: Click 1 to configure the physical ports. Click LAGS to configure the link aggregation groups. Select the desired port for Storm Control configuration. It is multi-optional. Port: Displays the port number of the switch. Broadcast Rate Mode: Broadcast: Multicast Rate Mode: Multicast: UL-Frame Rate Mode: UL-Frame: LAG: Select the broadcast rate mode, kbps or ratio. kbps: Specify the threshold in kbits per second. ratio: Specify the threshold as a percentage of the bandwidth. Select the bandwidth for receiving broadcast packets on the port. The packet traffic exceeding the bandwidth will be discarded. Select Disable to disable the broadcast control feature on the port. Select the multicast rate mode, kbps or ratio. kbps: Specify the threshold in kbits per second. ratio: Specify the threshold as a percentage of the bandwidth. Select the bandwidth for receiving multicast packets on the port. The packet traffic exceeding the bandwidth will be discarded. Select Disable to disable the multicast control feature on the port. Select the UL-Frame rate mode, kbps or ratio. kbps: Specify the threshold in kbits per second. ratio: Specify the threshold as a percentage of the bandwidth. Select the bandwidth for receiving UL-Frame on the port. The packet traffic exceeding the bandwidth will be discarded. Select Disable to disable the UL-Frame control feature on the port. Displays the LAG number which the port belongs to. Note: If you enable storm control feature for the ingress rate limit-enabled port, ingress rate limit feature will be disabled for this port. 9.3 Voice VLAN 121