TRENDnet TPE-1620WS User's Guide - Page 19
Enable or disable SNMP and modify idle timeout settings, Web Server Status
View all TRENDnet TPE-1620WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TRENDnet User's Guide Enable or disable SNMP and modify idle timeout settings System > User Interface This section explains how to enable SNMP on the switch and modify the switch management page idle timeout settings. Note: If you disable the SNMP on the switch, the switch will not be manageable via SNMP using MIBs. 1. Log into your switch management page (see "Access your switch management page" on page 11). 2. Click on System, and click on User Interface. 3. Review the settings. Click Apply to save changes. • SNMP Agent: Click the drop-down list to one of the following options. o Enabled - When you enable this parameter, the SNMP agent is active. You can manage the switch with SNMP network management software and the switch's private MIB. o Disabled - When you enable this parameter, the SNMP agent is inactive. • Web Server Status - Displays the current SNMP status. TPE-1620WS • Web Idle Timeout - Enter the idle period in minutes, when the switch will automatically log out a user from the switch management page. 4. Click Save Settings to Flash (menu). 5. Click Save Settings to Flash (button), then click OK. Note: This step saves all configuration changes to the NV-RAM to ensure that if the switch is rebooted or power cycled, the configuration changes will still be applied. © Copyright 2013 TRENDnet. All Rights Reserved. 19