TRENDnet TPE-1620WS User's Guide - Page 21
Enable HTTPS/SSL (Secure Socket Layer) management access, SSL Status
View all TRENDnet TPE-1620WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
TRENDnet User's Guide Enable HTTPS/SSL (Secure Socket Layer) management access System > SSL Settings By default, your switch management page can be accessed using standard web HTTP protocol which is unsecure. Enabling HTTPS/SSL management access allows access to the switch management page using secure encrypted communication which prevents unauthorized users from intercepting user name and password credentials. Typically, the switch is accessed within the local network only by system administrators which does not necessarily require additional security. It is recommended to only enable this feature, if allowing switch management access from other networks or over the Internet. Note: Once HTTPS/SSL management access is enabled, HTTP management access will be disabled forcing all access to the switch management page using secure encryption communication only. 1. Log into your switch management page (see "Access your switch management page" on page 11). 2. Click on System, and click on SSL Settings. 3. Review the settings. Click Apply to save changes. • SSL Status: o Enabled - Enables HTTPS/SSL management access and disables HTTP unsecured mode. o Disabled - Disabled HTTPS/SSL management access and enabled HTTP unsecured mode. (Default setting). TPE-1620WS Click Continue, Proceed to this website, and accept the certificate if prompted. 4. Click Save Settings to Flash (menu). 5. Click Save Settings to Flash (button), then click OK. Note: This step saves all configuration changes to the NV-RAM to ensure that if the switch is rebooted or power cycled, the configuration changes will still be applied. If enabling SSL management access, you will need to access the switch management page using HTTPS instead of HTTP. (e.g. https://192.168.10.200) © Copyright 2013 TRENDnet. All Rights Reserved. 21