TRENDnet TPE-1620WS User's Guide - Page 44

Set GVRP port settings, Dynamic Vlan Status

Get TRENDnet TPE-1620WS PDF manuals and user guides View all TRENDnet TPE-1620WS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

TRENDnet User's Guide Set GVRP port settings Bridge > GVRP > Port Settings This section will allow you to select which ports will have GVRP enabled or will be restricted from using GVRP. 1. Log into your switch management page (see "Access your switch management page" on page 11). 2. Click on Bridge, click on GVRP and click on Port Settings. 3. Review the settings for each port. Click Apply to save the settings. • Port - This parameter displays the ports on the switch. • Dynamic Vlan Status - This parameter defines the GVRP status of the port. From the Dynamic Vlan Status field, select one of the following choices from the pull-down menu: o Ignore - This parameter indicates that the setting in the All row does not apply to the Dynamic Vlan Status field. In other words, each port is set individually. o Enable - The Dynamic Vlan is activated for the port row selected. o Disable - The Dynamic Vlan is de-active for the port row selected. • Restricted VLAN Registration - This parameter controls if the VLAN registration on the port is restricted or not. o Ignore - This parameter indicates that the setting in the All row does not apply to the Restricted VLAN Registration field. In other words, each port is set individually. o Enable - The Restricted VLAN Registration is active for the port row selected. o Disable - The Restricted VLAN Registration is de-active for the port row selected. TPE-1620WS 4. Click Save Settings to Flash (menu). 5. Click Save Settings to Flash (button), then click OK. Note: This step saves all configuration changes to the NV-RAM to ensure that if the switch is rebooted or power cycled, the configuration changes will still be applied. © Copyright 2013 TRENDnet. All Rights Reserved. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-1620WS
44
Set GVRP port settings
Bridge > GVRP > Port Settings
This section will allow you to select which ports will have GVRP enabled or will be
restricted from using GVRP.
1. Log into your switch management page (see “
Access your switch management page
”
on page 11).
2. Click on
Bridge
, click on
GVRP
and click on
Port Settings
.
3.
Review the settings for each port. Click
Apply
to save the settings.
•
Port
- This parameter displays the ports on the switch.
•
Dynamic Vlan Status
- This parameter defines the GVRP status of the port.
From the
Dynamic Vlan Status
field, select one of the following choices from
the pull-down menu:
o
Ignore
- This parameter indicates that the setting in the
All
row does
not apply to the
Dynamic Vlan Status
field. In other words, each port
is set individually.
o
Enable -
The
Dynamic Vlan
is activated for the port row selected.
o
Disable
- The
Dynamic Vlan
is de-active for the port row selected.
•
Restricted VLAN Registration
- This parameter controls if the VLAN registration
on the port is restricted or not.
o
Ignore
- This parameter indicates that the setting in the
All
row does
not apply to the
Restricted VLAN Registration
field. In other words,
each port is set individually.
o
Enable -
The
Restricted VLAN Registration
is active for the port row
selected.
o
Disable
- The
Restricted VLAN Registration
is de-active for the port
row selected.
4. Click
Save Settings to Flash (menu)
.
5. Click
Save Settings to Flash (button)
, then click
OK.
Note:
This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.