TRENDnet TPE-1620WS User's Guide - Page 61
Con parameters for RMON Ethernet statistics
View all TRENDnet TPE-1620WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
TRENDnet User's Guide 3. Click the RMON Status drop-down list and select Enabled to enable RMON. Click Apply to save settings. 4. Click Save Settings to Flash (menu). 5. Click Save Settings to Flash (button), then click OK. Note: This step saves all configuration changes to the NV-RAM to ensure that if the switch is rebooted or power cycled, the configuration changes will still be applied. TPE-1620WS Configure parameters for RMON Ethernet statistics RMON > Statistics You can remotely view individual port statistics with RMON by using your SNMP NMS software and the RMON portion of the MIB tree. 1. Log into your switch management page (see "Access your switch management page" on page 11). 2. Click on RMON and click on Statistics. 3. Review the settings. • Index: This parameter specifies the ID number of the new group. The range is 1 to 65535. • Port: This parameter specifies the port where you want to monitor the statistical information of the Ethernet traffic. • Owner: This parameter is used to identify the person who created an entry. It is primarily intended for switches that are managed by more than one person, and is an optional field. Click Add to add the entry to the table. © Copyright 2013 TRENDnet. All Rights Reserved. 61