Toshiba Qosmio G40 PQG40C-MM108C Users Manual Canada; English - Page 169

AV functions Settings for connecting an external video device, the set-top box or other external device When connecting an external video device, the set-top box or other analog device to the computer S-VIDEO or AV-IN ports, check the TOSHIBA TV Tuner item on the "TV Signal screen" configuration screen in Media Center, and uncheck the TOSHIBA TV Tuner w/o AV-in item. ■ Simultaneous reception and recording cannot be used when an external video device is connected and the above settings are made. Once the external video device is disconnected, simultaneous reception and recording can again be used by following the instructions in Configuring 2 tuners to receive simultaneously. ■ Simultaneous reception and recording cannot be used when the settop box is connected and the above settings are made. Refer to the Connecting the set-top box for set-top box connection methods. Refer to Chapter 9, Optional Devices, when connecting an analog video camera, video deck, or other external video device. Connecting the Video devices This section explains configuration methods for connecting the video devices. Connecting the VIDEO-IN port This port allows you to import video data from analog video cameras or video decks by connecting your computer to this type of device. Imported video can be edited or written to a DVD disc. 1. Insert one end of the VIDEO-IN cable into the VIDEO-IN port of your computer. VIDEO-IN port VIDEO-IN cable Figure 8-14 Connecting the VIDEO-IN port 2. Insert the other end of the VIDEO-IN cable into the output port of the analog device you wish to connect. User's Manual 8-17