Toshiba Tecra M3-S212TD User Guide - Page 63
Directing the display output when you turn on the computer
View all Toshiba Tecra M3-S212TD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Connecting Other External Devices Using external display devices 63 4 Set the display mode by pressing Fn + F5 or by using the Display Properties settings. For more information, see below. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1 Connect the monitor's video cable to the RGB port on the back of the computer. 2 Connect the device's power cable to a live electrical outlet. 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5 or by setting the Display Properties settings. For more information, see below. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect. This hot key cycles through the settings in the following order: ❖ Built-in display only ❖ Built-in display and external device simultaneously ❖ External device only ❖ Built-in display and TV (or other external video device) simultaneously