Uniden MYSTIC English Owners Manual - Page 37

Mystic OM.book Page 35 Wednesday, October 22, 2003 8:59 PM To change the U.I.C. selection: 1. Press [MENU]. 2. At the Menu screen, use S and T to highlight VHF and press [ENTER]. 3. At the VHF Menu screen, use S and T to highlight U.I.C. and press [ENTER]. 4. At the U.I.C. Selection Menu, use S and T to highlight the selection you want, and press [ENTER]. 5. You will be returned to the VHF screen, with the appropriate icon (USA, INT, or CAN) displayed. Directory The Directory is used to store the names of ships. These names are used for Digital Selective Calling (DSC). The DSC functions are covered in Advanced VHF Operations, beginning on page 90. To enter names in the Directory: 1. Press [MENU]. 2. At the Menu screen, use S and T to highlight VHF and press [ENTER]. 3. At the VHF Menu screen, use S and T to highlight Directory and press [ENTER]. 4. The only entry you should see at the Directory screen at this point is New User. Press [ENTER]. 5. At the Edit User screen, press [ENTER]. The Name field is highlighted, indicating you can enter a ship's name. Press [ENTER]. 6. Use the alphanumeric keypad to enter the data using the technique covered in the previous Section ("Entering Data" on page 28). Directory names can be up to 12 characters long. 7. When you have entered the Ship's Name, highlight OK and press [ENTER] to accept the entry. The MMSI field is now highlighted. Press [ENTER]. Use the technique shown on page 31 to enter the Ship's MMSI number. When you are finished, press [ENTER]. Highlight OK and press [ENTER] to store the information in the Directory. You can now add more Ship's Names and MMSI numbers using the same procedure. You can enter up to names in the directory. If you try to add more than 99, you'll see an ERROR message. 35