Uniden MYSTIC English Owners Manual - Page 39
FIPS codes, To set a FIPS code
UPC - 050633500262
View all Uniden MYSTIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Mystic OM.book Page 37 Wednesday, October 22, 2003 8:59 PM FIPS codes The 6-digit Federal Information Processing System (FIPS) code established by the National Weather Service (NWS) identifies geographic areas in the United States. You must program the FIPS codes to receive S.A.M.E. (Specific Area Message Encoding) alerts about Emergency/ Weather occurring in a particular area. If you do not program the codes, you will receive all the alerts that are sent. To obtain the FIPS code for a particular area contact the NWS toll free at 1-888-NWR-SAME (1-888697-7263). Or visit their website: http://www.nws.noaa.gov/nwr/ indexnw.htm. A list of event codes are located on "Event Code" on page 113. You can program up to 15 FIPS codes. If you try to add more than 15, you'll see an ERROR message. If you don't program any FIPS codes, you will receive a WX Alert for all S.A.M.E. alerts, no matter where in the country it occurs. To set a FIPS code: 1. Press [MENU]. 2. At the Menu screen, select VHF and press [ENTER]. 3. At the VHF Menu screen, select FIPS Code and press [ENTER]. 4. The only entry you should see at the FIPS Menu at this point is New Location. Press [ENTER]. 5. Press [ENTER] to highlight the numeric field. You are now ready to enter the new FIPS code. Use the technique covered in "Numbered Fields" on page 31. 6. When you have entered all the digits, press [ENTER]. The highlight will move to OK box. Press [ENTER] to accept the entry. If you do not want this entry, press X to move the highlight to the Cancel box and press [ENTER]. 7. The screen returns to the FIPS Menu. You can now add more FIPS codes using the same procedure. 37