Xerox 8200B Troubleshooting Guide - Page 19

Color and Color Sampler Charts Each color sampler chart is several pages long. Either: I Print them in panels and connect them to form a wall chart. I Print them and place them in a binder for easy reference. Note For information on printing the PANTONE Color sampler chart, refer to page 17. Color sampler chart descriptions Color sampler chart Number Front panel CentreWare Utility of pages* selection IS file CMYK Sampler Chart Cyan, magenta, yellow, and black color model 18 • • • RGB Sampler Chart Red, green, and blue color model 12 • • • HSB Sampler Chart Hue, saturation, and brightness color model 12 • * This is the number of pages if you use one-sided printing; if you use two-sided printing, the number of pages will be half of this value. Depending on the type of color sampler chart, you can print the chart by using: I A selection on the printer's front panel I CentreWare Internet Services I A utility file Printing a color sampler chart from the printer's front panel Note Use the same print-quality mode and color correction to print the chart that you plan to use when printing from your application; see page 3 for more information. If you use any other print-quality mode or color correction in the printer driver when you print from an application, the colors may not match the chart. To specify the print-quality mode and color correction to use for the color sampler chart, on the printer's front panel: 1. With Menus highlighted, press the OK key. 2. Press the Scroll Down key to scroll to the Printer Setup Menu. 3. Press the OK key. 4. Scroll to Job Defaults Menu. 5. Press the OK key. 6. With Set Print-quality Mode highlighted, press the OK key. 7. Scroll to the print-quality mode you want. Advanced Features and Troubleshooting Manual 13