Yamaha RX-V2065 Owner's Manual - Page 29

INTRODUCTION PREPARATION BASIC OPERATION Playback Switching remotely controlled external components linked to scene selections You can operate an external component with the remote control of this unit by setting a remote control code for the external component for each input source. Setting remote control codes for desired input sources allows you to switch between external components linked to scene selections. 1 Register the remote control code of an external component to the desired input source (page 72). Note • This feature is not available for TUNER, SIRIUS and XM input sources. 2 While holding down the desired hSCENE key, press and hold the dInput selection key to which you registered a remote control code in step 1. From now on the external component can be remotely controllable just by selecting a scene. Muting audio output 1 Press vMUTE on the remote control to mute the audio output. 2 Press vMUTE again to resume audio output. Adjusting high/low frequency sounds (tone control) You can adjust the balance of the high frequency range (Treble) and low frequency range (Bass) of sounds output from the front left and right speakers to obtain desired tone. 1 Press OTONE CONTROL on the front panel repeatedly to select "Treble" or "Bass". Treble 0.0dB Selecting a source on the GUI screen 1 Press iON SCREEN on the remote control. The GUI screen appears on the video monitor. Select Scene BD/DVD TV CD RADIO 2 Use jCursor k / n repeatedly to switch the page and jCursor l / h repeatedly to select the desired source. Category Source Select Scene BD/DVD, TV, CD, RADIO Select Input HDMI1-4, V-AUX, PHONO, MULTI CH, DOCK, AV1-6, AUDIO1/2, USB, NET RADIO, PC, Rhapsody, TUNER, SIRIUS, XM y • If an input source you want to select is available in "Select Scene", you can select the desired input source and sound field program at once. 3 Press jENTER. 2 Rotate the PPROGRAM selector to adjust the frequency range. Control range: -10.0 dB to +10.0 dB The display returns to the previous screen automatically in few seconds. Note • The tone control settings are not effective when this unit is in the Pure Direct mode or "MULTI CH" is selected as an input source. Enjoying pure hi-fi sound Use Pure Direct mode to enjoy the pure high fidelity sound of the selected source. When Pure Direct mode is activated, this unit plays back the selected source with the least circuitry. Press SPURE DIRECT (or rPURE DIRECT) to turn the Pure Direct mode on or off. SPURE DIRECT lights up when you set Pure Direct mode on. The following features are disabled in the Pure Direct mode. - sound field program, tone control - display and operation of the Option menu and Setup menu - multi-zone function y • The font panel display automatically turns off while this unit in the Pure Direct mode. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 25 En