Yamaha RX-V2065 Owner's Manual - Page 72

Operating various settings for this unit (Setup menu) Reverb Level Adjustable range: 0 to100% Reverb Level parameter adjusts the reverberation sound level. Increasing the value of Reverb Level makes the reverbration sound level higher, which allows you to create more echo. Source sound Level (dB) Reverb Level Time Parameters for certain sound field programs ■ Parameter for MOVIE sound field programs Decode Type Choices: PLIIx Movie (PLII Movie), Neo:6 Cinema Selects the decoder type for use with the MOVIE sound field programs. Note • You cannot select a decoder for the following MOVIE sound field programs. - Mono Movie - Sports - Action Game - Roleplaying Game ■ Parameter for 2ch Stereo Direct Choices: Auto*, Off Automatically bypasses the DSP circuit and tone control circuit when an analog sound source is selected as the input source. You can enjoy a higher quality sound. Auto Outputs sound by bypassing the DSP circuit and tone control circuit when the "Bass" and "Treble" tone controls are both set to 0 dB. Off Do not bypass the DSP circuit and tone control. ■ Parameters for 7ch Stereo Center Level / Surround L Level / Surround R Level / Surround Back Level / Presence L Level / Presence R Level Adjustable range: 0 to 100% Adjusts the volume of the center, surround L/R, surround back and presence L/R channels in the 7ch Stereo program. The available parameters differ depending on the setting of the speakers. ■ Parameter for Straight Enhancer and 7ch Enhancer Effect Level Choices: High*, Low Adjusts the Compressed Music Enhancer effect level. When the high-frequency signals of the source is emphasized too much, set the effect level to "Low". To reduce the effect, set this parameter to "Low". Decoder parameters You can customize decoder effects by setting the following parameters. For details about the types of decoders, see "Surround decode mode" (page 29). ■ Parameter for PLIIx Music and PLII Music Panorama Choices: Off*, On Adjusts the soundscape of the front sound field. Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect. Dimension Adjustable range: -3 to STD* to +3 Adjusts the difference in level between the front sound field and the surround sound field. You can adjust the difference in level created by the software being played back to obtain the preferred sound balance. The surround sound gets stronger as you make the value more negative and the front sound gets stronger as you make the value more positive. Center Width Adjustable range: 0 to 3* to 7 You can spread the center sound toward left and right according to your preference. Set this parameter to 0 for outputting the center sound from the center speaker only, or to 7 for outputting it from the front left/right speaker. ■ Parameter for Neo:6 Music Center Image Adjustable range: 0.0 to 0.3* to 1.0 Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary. Memory Guard Choices: Off*, On Protects the Setup menu settings against accidental alteration. Off Not protect settings. On Protects the Setup menu settings (except for "Decode Type" in "DSP Parameter" and "Memory Guard"). Note • When this parameter is switched to "On", " " appears at the top left corner of the Setup menu screen. 68 En