Yamaha RX-V2065 Owner's Manual - Page 66

Operating various settings for this unit (Setup menu) Sound Setup You can set various items for sound outputs. ■ Dynamic Range Choices: Min/Auto, STD, Max* Selects the dynamic range adjustment method for reproducing bitstream signals. Min/Auto STD Max (Min) Sets the dynamic range suitable for low volume or a quiet environment, such as at night, for bitstream signals except for Dolby TrueHD signals. (Auto) Adjusts the dynamic range for Dolby TrueHD signals based on input signal information. Sets the standard dynamic range recommended for regular home use. Outputs sound without adjusting the dynamic range of the input signals. ■ Lipsync Adjusts delay between video output and audio output. This unit automatically adjusts the delay (automatic lipsync) when a TV that supports the automatic lipsync is connected to the HDMI OUT 1 or HDMI OUT 2 jack of this unit and HDMI signals are output only from the corresponding HDMI OUT jack. HDMI OUT1 Adjustable range: 0* to 240ms (1 ms step) Displays the delay time adjusted by automatic lipsync for HDMI signals output from the HDMI OUT 1 jack. To fine adjust the delay time, set an offset time in the "Offset" field. This offset time is also applied to the signals output from the HDMI OUT 2 jack when both the HDMI OUT 1 and HDMI OUT 2 jacks are active. HDMI OUT2 Adjustable range: 0* to 240ms (1 ms step) Displays the delay time adjusted by automatic lipsync for HDMI signals output from the HDMI OUT 2 jack. To fine adjust the delay time, set an offset time in the "Offset" field. ANALOG MONITOR OUT Adjustable range: 0* to 240ms (1 ms step) Adjusts the delay time applied when only the analog MONITOR OUT (COMPONENT VIDEO or VIDEO) jacks are used. Function Setup You can set various items for HDMI and display. HDMI You can set items for HDMI. ■ HDMI Control Choices: On, Off* Selects on or off of the HDMI control function when a component that supports the HDMI control function is connected to the HDMI OUT 1 jack of this unit. When this parameter is set to "On", this unit output signals input from the HDMI 1-4 jacks or HDMI IN (VIDEO AUX) jack to the video monitor even when this unit is on standby. On Enables the HDMI control function. Off Disables the HDMI control function. y • The BHDMI THROUGH indicator lights up in the following cases while this unit is on standby. - when the HDMI control function is on - when the HDMI signal standby-through function is currently working • When "HDMI Control" is set to "On", this unit consumes 1 to 3 watts of power depending on a condition of an HDMI signal passing through this unit. ■ Standby Through Choices: On, Off* Selects on or off of output of HDMI signals input from the HDMI 1-4 jacks or HDMI IN (VIDEO AUX) jack to the active HDMI OUT jack(s) when this unit is on standby. When this parameter is set to "On", this unit output signals input from the HDMI 1-4 jacks or HDMI IN (VIDEO AUX) jack to the video monitor(s) even when this unit is on standby. On Outputs the HDMI signals to the active HDMI OUT jack(s) Off Not output the HDMI signals to the HDMI OUT 1/2 jacks. y • This parameter is not available when "HDMI Control" is set to "On". • To enables HDMI signal standby-through output, any one of the input sources connected to the HDMI 1-4 jacks or HDMI IN (VIDEO AUX) jack must be selected before switching to standby. • When "Standby Through" is set to "On", the BHDMI THROUGH indicator lights up. In this state, the amount of power consumption in the standby mode increases. ■ Audio Output Choices: Amplifier*, TV, Amplifier + TV Selects this unit or a component connected to the HDMI OUT 1 jack of this unit for reproducing sound signals input from the HDMI 1-4 jacks or HDMI IN (VIDEO AUX) jack. Amplifier Outputs HDMI sound signals form the speakers connected to this unit. 62 En