Yamaha RX-V2065 Owner's Manual - Page 83

Tuner FM/AM, HD Radio™ Reception U.S.A. model only

Get Yamaha RX-V2065 - AV Network Receiver PDF manuals and user guides
UPC - 027108933948
View all Yamaha RX-V2065 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

INTRODUCTION PREPARATION BASIC OPERATION Tuner (FM/AM) Troubleshooting Problem Cause Remedy FM stereo reception is noisy. There is distortion, and FM clear reception cannot be obtained even with a good FM antenna. The desired station cannot be tuned into with the automatic tuning method. The desired station cannot be tuned into with the automatic tuning method. There are continuous AM crackling and hissing noises. There are buzzing and whining noises. You are too far from the station transmitter or the input from the antenna is weak. There is multi-path interference. You are in an area far from a station or an input from the antenna is weak. The signal is weak or the antenna connections are loose. Supplied AM loop antenna is not connected. The noises may be caused by lightning, fluorescent lamps, motors, thermostats and other electrical equipment. A TV set is being used nearby. Check the antenna connections. Replace the outdoor antenna with a more sensitive multi-element antenna. Switch to monaural mode. Adjust the antenna height or orientation, or place it in a different location. Replace an outdoor antenna with more sensitive multi element antenna. Tune in manually or by direct frequency tuning. Adjust the AM loop antenna orientation. Use the manual tuning method. Connect the AM loop antenna correctly even if you use an outdoor antenna. It is difficult to completely eliminate noise, but it can be reduced by installing and properly grounding an outdoor AM antenna. Move this unit away from the TV set. HD Radio™ Reception (U.S.A. model only) See page 20 - 55 - - 31 20 31 20 20 - Problem Cause Remedy This unit cannot receive the HD Radio signals of the selected radio station. The radio station provides analog FM/AM radio service only. The signal is too weak. Select other radio stations that provides the HD Radio service. Adjust the antenna position. Use a high-quality FM/AM antenna. "Audio Mode" in the Option menu is set to "Mono". Set "Audio Mode" to "Auto". This unit cannot select other audio programs than the main program. The radio station provides one audio program only. HD Radio information The radio station does not provide the does not appear. information. See page 33 - - 55 ADVANCED OPERATION APPENDIX English 79 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
79
En
Troubleshooting
English
INTRODUCTION
APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
Tuner (FM/AM)
Problem
Cause
Remedy
See
page
FM
FM stereo reception is
noisy.
You are too far from the station
transmitter or the input from the
antenna is weak.
Check the antenna connections.
20
Replace the outdoor antenna with a more
sensitive multi-element antenna.
—
Switch to monaural mode.
55
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multi-path interference.
Adjust the antenna height or orientation, or
place it in a different location.
—
The desired station
cannot be tuned into
with the automatic
tuning method.
You are in an area far from a station or
an input from the antenna is weak.
Replace an outdoor antenna with more
sensitive multi element antenna.
—
Tune in manually or by direct frequency
tuning.
31
AM
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Adjust the AM loop antenna orientation.
20
Use the manual tuning method.
31
There are continuous
crackling and hissing
noises.
Supplied AM loop antenna is not
connected.
Connect the AM loop antenna correctly even
if you use an outdoor antenna.
20
The noises may be caused by lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.
It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
20
There are buzzing and
whining noises.
A TV set is being used nearby.
Move this unit away from the TV set.
—
HD Radio™ Reception (U.S.A. model only)
Problem
Cause
Remedy
See
page
This unit cannot
receive the HD Radio
signals of the
selected radio station.
The radio station provides analog FM/AM
radio service only.
Select other radio stations that provides the HD Radio
service.
33
The signal is too weak.
Adjust the antenna position.
—
Use a high-quality FM/AM antenna.
—
“Audio Mode” in the Option menu is set
to “Mono”.
Set “Audio Mode” to “Auto”.
55
This unit cannot
select other audio
programs than the
main program.
The radio station provides one audio
program only.
HD Radio information
does not appear.
The radio station does not provide the
information.