Yamaha RX-V2065 Owner's Manual - Page 70
Sound field parameters for advanced, configurations
UPC - 027108933948
View all Yamaha RX-V2065 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Operating various settings for this unit (Setup menu) Dialogue Lift Choices: 0* to 5 Use this feature to adjust the vertical position of the dialogues in movies. The ideal position of the dialogues is at the center of the video monitor screen. The ideal dialogue position If the dialogues are heard at the lower position of the video monitor screen, increase the value of "Dialogue Lift". Move up to the ideal dialogue position When the value is set to zero, the position is at the lowest. The position gets higher as you increase the value. Notes • This setting is available only when "Extra Speaker Assignment" is set to "Presence" (page 60). • You cannot move the dialogue position down from the initial dialogue position. 3D DSP Choices: On*, Off When CINEMA DSP 3D is enabled, sets whether to use sound field programs in 3D mode. Note • This setting is available only when "Extra Speaker Assignment" is set to "Presence" (page 60). Sound field parameters for advanced configurations ■ Parameters for adjusting early-reflected sound Initial Delay / P. Initial Delay / Sur. Initial Delay / Sur. Back Initial Delay Adjustable range: 1 to 99ms (Initial Delay / P. Initial Delay), 1 to 49ms (Sur. Initial Delay / Sur. Back Initial Delay) Adjusts attenuation characteristics of early-reflected sound. You can create a lively sound field (with a high reverberant sound level) as you increase the value, and a dead sound field (with a low reverberant sound level) as you decrease the value. Creating either a lively sound field or a dead sound field in an actual music hall is determined by the acoustic absorption characteristics of reflection surfaces. A dead sound field is created when the attenuation time is short while a lively sound field is created when the attenuation time is long. Original source sound Early-reflected sound Level Level Delay Time Sound source Delay Time Reflecting surface Small = 1ms Large = 99ms y • We recommended that you adjust the size of corresponding sound field when you adjust the delay time. ■ Parameters for specifying room size Room Size / P. Room Size / Sur. Room Size / Sur. Back Room Size Adjustable range: 0.1 to 2.0 Produces different senses of sound expansion according to room sizes specified. In a large size room such as a music hall, the duration from when reflected sound is heard until when the next reflected sound is heard is long. Thus, different senses of sound expansion can be created by changing the duration. 1.0 is the original room size. When this parameter is set to 2.0, each side of the room is defined as twice larger than the original room size. 66 En