Yamaha RX-V2065 Owner's Manual - Page 75

INTRODUCTION PREPARATION BASIC OPERATION Using multi-zone configuration Controlling Zone2/3 You can select and control Zone2/3 by using the control keys on the front panel or on the remote control. The available operations are as follows: • Selecting the input source. • Tuning into the desired station (when "TUNER" is selected as the input source) • Tuning into the desired channel (when "XM" or "SIRIUS" is selected as the input source) (U.S.A. model only) • Adjusting the volume of Zone2/3 (when Zone2/3 speakers are connected to the EXTRA SP terminals). Switching to the Zone2/3 operation mode Before controlling Zone2/3 by using the control keys on the front panel or on the remote control, follow the procedure below to switch this unit to the Zone2/3 operation mode. ■ To control Zone2/3 by using the front panel control keys Press DZONE CONTROLS repeatedly to select the zone you want to control while the target zone is turned on. The zone indicator flashes on the front panel display for approximately 10 seconds. ZONE 2 or ZONE 3 Flashes Flashes Note • Complete each step while the zone indicator is flashing on the front panel display. Otherwise, the Zone2 or Zone3 operation mode is automatically canceled and this unit returns to the main zone operation mode. ■ To control Zone2/3 by using the remote control Switch bZone selection switch to "ZONE2" or "ZONE3" position. Operations in the Zone2/3 operation mode ■ Turning on or set Zone2 to standby Press AZONE2 ON/OFF (or pPOWER). ■ Turning on or set Zone3 to standby Press CZONE3 ON/OFF (or pPOWER). ■ Operating Zone2/3 Rotate the TINPUT selector (or press dInput selection key) to select the desired input source. If you press dUSB/NET on the remote control, press xSub-input selection key to select a sub-input source. • Select "AV5", "AV6", "AUDIO1", "AUDIO2" or "PHONO" to listen to the input source in the selected zone. • Select "DOCK" to use the iPod features (page 44) or Bluetooth features (page 46) in the selected zone. • Select "TUNER" to use the FM/AM radio features (page 31) in the selected zone. • Select "SIRIUS" to use the SIRIUS Satellite Radio features (page 39) in the selected zone. • Select "XM" to use the XM Satellite Radio features (page 35) in the selected zone. • Select "USB" to use the USB features (page 47) in the selected zone. • Select "NET RADIO" to use the Internet Radio features (page 50) in the selected zone. • Select "PC" to use the PC features (page 48) in the selected zone. • Select "Rhapsody" to use the Rhapsody® features (page 51) in the selected zone. Note • The sub-input source (USB, NET RADIO, PC and Rhapsody) for "USB/ NET" is shared among all zones (main, Zone2 and Zone3). You cannot select different sub-input source for each zone. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 71 En