ZyXEL GS2200-8 User Guide - Page 176

Chapter 23 Multicast Table 58 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile (continued) LABEL End Address DESCRIPTION Type the ending multicast IP address for a range of IP addresses that you want to belong to the IGMP filter profile. Add Clear Profile Name Start Address End Address Delete If you want to add a single multicast IP address, enter it in both the Start Address and End Address fields. Click Add to save the profile to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Clear to clear the fields to the factory defaults. This field displays the descriptive name of the profile. This field displays the start of the multicast address range. This field displays the end of the multicast address range. To delete the profile(s) and all the accompanying rules, select the profile(s) that you want to remove in the Delete Profile column, then click the Delete button. Cancel To delete a rule(s) from a profile, select the rule(s) that you want to remove in the Delete Rule column, then click the Delete button. Click Cancel to clear the Delete Profile/Delete Rule check boxes. 23.6 The MVR Screen Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for each multicast VLAN. Click Advanced Applications > Multicast > Multicast Setting > MVR link to display the screen as shown next. Note: You can create up to three multicast VLANs and up to 256 multicast rules on the Switch. 176 GS2200-8/24 User's Guide