ZyXEL NWA1100 User Guide - Page 106
IP Screen, IP Screen
View all ZyXEL NWA1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter 11 IP Screen 11.4 IP Screen Use this screen to configure the IP address for your NWA. Click IP to display the following screen. Figure 51 IP Setup The following table describes the labels in this screen. Table 33 IP Setup LABEL Obtain IP Address Automatically DESCRIPTION Select this option if your NWA is using a dynamically assigned IP address from a DHCP server each time. Use Fixed IP Address IP Address Note: You must know the IP address assigned to the NWA (by the DHCP server) to access the NWA again. Select this option if your NWA is using a static IP address. When you select this option, fill in the fields below. Enter the IP address of your NWA in dotted decimal notation. Subnet Mask Gateway IP Address Spanning Tree Apply Reset Note: If you change the NWA's IP address, you must use the new IP address if you want to access the web configurator again. Type the subnet mask. Type the IP address of the gateway. The gateway is an immediate neighbor of your NWA that will forward the packet to the destination. On the LAN, the gateway must be a router on the same segment as your NWA; over the WAN, the gateway must be the IP address of one of the remote nodes. (R)STP (Section 11.5.2 on page 107) detects and breaks network loops and provides backup links between switches, bridges or routers. It allows a bridge to interact with other (R)STP -compliant bridges in your network to ensure that only one path exists between any two stations on the network. Select the check box to activate STP on the NWA. Click Apply to save your changes. Click Reset to begin configuring this screen afresh. 106 NWA1100-N User's Guide