ZyXEL NWA1100 User Guide - Page 112
The Telnet Screen, 12.5 The FTP Screen - n firmware download
View all ZyXEL NWA1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Chapter 12 Remote Management timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the SYSTEM screen. 12.4 The Telnet Screen Use this screen to configure your NWA for remote Telnet access. You can use Telnet to access the NWA's Command Line Interface (CLI). Click REMOTE MGNT > TELNET. The following screen displays. Figure 54 Remote Management: Telnet The following table describes the labels in this screen. Table 37 Remote Management: Telnet LABEL DESCRIPTION TELNET Server Port Server Access Secured Client IP Address You can change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Select the interface(s) through which a computer may access the NWA using Telnet. A secured client is a "trusted" computer that is allowed to communicate with the NWA using this service. Select All to allow any computer to access the NWA using this service. Secured Client MAC Address Apply Reset Choose Selected to just allow the computer with the IP address that you specify to access the NWA using this service. Select All to allow any computer to access the NWA using this service. Choose Selected to just allow the computer with the MAC address that you specify to access the NWA using this service. Click Apply to save your customized settings and exit this screen. Click Reset to begin configuring this screen afresh. 12.5 The FTP Screen Use this screen to upload and download the NWA's firmware using FTP. To use this feature, your computer must have an FTP client. 112 NWA1100-N User's Guide