ZyXEL NWA1100 User Guide - Page 59
Technical Reference, 5.6.1 Pre-defined NTP Time Servers List, System, Time Setting - manual
View all ZyXEL NWA1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 5 System Screens Table 9 System > Time (continued) LABEL DESCRIPTION Manual IP Enter the IP address or URL of your time server. Check with your ISP/ network administrator if you are unsure of this information. Time Zone Setup Time Zone Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Apply Click Apply to save your changes. Refresh Click Refresh to reload the previous configuration for this screen. 5.6 Technical Reference This section provides some technical information about the topics covered in this chapter. 5.6.1 Pre-defined NTP Time Servers List When you turn on the NWA for the first time, the date and time start at 2000-01-01 00:00:00. When you select Auto in the System > Time Setting screen, the NWA then attempts to synchronize with one of the following pre-defined list of NTP time servers. The NWA continues to use the following pre-defined list of NTP time servers if you do not specify a time server or it cannot synchronize with the time server you specified. Table 10 Default Time Servers ntp1.cs.wisc.edu ntp1.gbg.netnod.se ntp2.cs.wisc.edu tock.usno.navy.mil ntp3.cs.wisc.edu ntp.cs.strath.ac.uk ntp1.sp.se time1.stupi.se tick.stdtime.gov.tw tock.stdtime.gov.tw time.stdtime.gov.tw When the NWA uses the pre-defined list of NTP time servers, it randomly selects one server and tries to synchronize with it. If the synchronization fails, then the NWA goes through the rest of the list in order from the first one tried until either it is successful or all the pre-defined NTP time servers have been tried. NWA1100-N User's Guide 59