ZyXEL NWA1100 User Guide - Page 70
Wireless Client Mode, Table 13, LABEL, DESCRIPTION, Wireless Client, Operation Mode
View all ZyXEL NWA1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 6 Wireless Settings Screen 6.4.4 Wireless Client Mode Use this screen to turn your NWA into a wireless client. Select Wireless Client as the Operation Mode. The following screen displays. Figure 27 Wireless > Wireless Settings: Wireless Client The following table describes the general wireless LAN labels in this screen. Table 13 Wireless > Wireless Settings: Wireless Client LABEL DESCRIPTION Basic Settings Operation Mode Select Wireless Client in this field. Site Survey Click this to view a list of available wireless access points within the range. Select the AP you want to use and click Selected. Wireless Mode Note: After selecting Wireless Client as the Operation Mode in the Basic Settings section, you must click Apply to be able to select from the AP list. Select 802.11b/g to allow both IEEE802.11b and IEEE802.11g compliant WLAN devices to associate with the NWA. The transmission rate of your NWA might be reduced. Select 802.11b/g/n to allow IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with the NWA. The transmission rate of the NWA might be reduced. 70 NWA1100-N User's Guide