ZyXEL U-1496S Plus User Guide - Page 24
Repeat Last Dial
View all ZyXEL U-1496S Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
answer mode on-line. Whenever your modem establishes a connection with another modem, one of the modems must be in answer mode and the other modem must be in originate mode or a connection is not possible. Equivalent AT commands: +++ Escape sequence code; causes a modem to return to command mode. Enter escape sequence in data state and wait for the modem to respond. ATH On-hook; disconnect the modem. ATD Originate on-line. ATA Answer on-line. REPEAT LAST DIAL Access `R' (Repeat last dial) by pressing the left or right arrow key and the ENTER key. Before a connection is made, any key pressed from the front panel or terminal keyboard will abort the redial operation. Equivalent AT commands: ATDL Repeat last dial. A/ Repeat last command once. A> Repeat last command once, retry the last call up to 9 (depending on the country) times. AUTO ANSWER Move to the STATUS REGISTER menu, and change the S0 value to the number of rings until the modem will automatically answer. A value of zero disables auto answer. Equivalent AT commands: ATS0=0 Disable auto-answer. ATS0=n Auto answer on n rings. DIALING MESSAGE Dialing from the terminal or front panel will cause the following screen to be displayed on the LCD. ((MODE-13)) Dialed phone number will be displayed on the second line of the 20 X 2 LCD screen. If the number exceeds 20 digits, only the first 20 digits/characters will be displayed. If the phone jack is not plugged in or not attached, the LCD screen will display the following: