ZyXEL U-1496S Plus User Guide - Page 54
Ignore DTR signal, assume DTR always ON.
View all ZyXEL U-1496S Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
34 CONNECT 7200 35 CONNECT 9600 36 CONNECT 12000 37 CONNECT 14400 38 CONNECT 16800 39 CONNECT 19200 Z0 Z1 Z2 Z3 Z4 profile. Reset modem and load user profile 0. Reset modem and load user profile 1. Reset modem and load user profile 2. Reset modem and load user profile 3. Reset modem and load factory settings, also set factory default as power-on Note: Factory default (Z4) is the default power-on profile when the modem is shipped out of the factory. ATZn also sets profile n to be the power-on profile. ATZn sets FCLASS=0. +++ Escape sequence code, entered in data state, wait for modem to return to command state. $ Basic command summary HELP. &$ Extended AT& command summary HELP. *$ Extended AT* command summary HELP. EXTENDED AT& COMMAND SET &B0 DTE/DCE rate follows link rate. (If the communication software package has auto baud rate detection, please turn it ON.) (See also S44b6.) +&B1 DTE/DCE rate fixed at DTE setting, range from 300 to 76.8Kbps (Default). (See also S18, S20, S44b6.) &C0 Assume that the carrier is always present (force CD always ON). + &C1 CD tracks presence of carrier (Default). (See also S38b3, S42b7.) &D0 Ignore DTR signal, assume DTR always ON. &D1 108.1, DTR OFF-ON transition causes dial of the default number. (See also *Dn). + &D2 108.2, Data Terminal Ready, DTR OFF causes the modem to hang up and return to command state (Default). &D3 Same as &D2 but DTR OFF also causes the loading and reset from profile 0. &F Load factory settings to RAM as active configuration. + &G0 No guard tone (within USA, Canada) (Default). &G1 Reserved. &G2 1800 Hz guard tone. &H0 Flow control disabled. &H1 Reserved. &H2 Reserved. + &H3 Hardware CTS/RTS flow control (Default). &H4 Software XON/XOFF flow control. &H5 Reserved.