ZyXEL U-1496S Plus User Guide - Page 45

According to CCITT. See also S44b4, S41b5

Get ZyXEL U-1496S Plus PDF manuals and user guides View all ZyXEL U-1496S Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

=32; V.17FAX 14400/12000/9600/7200, V.29FAX 9600/7200, V.27terFAX 4800/2400. =34; ZyX 19200 19200 =35; ZyX 16800 16800 =36; ZyX 14400 14400 =37; ZyX 12000 12000 =38; ZyX 9600 9600 =39; ZyX 7200 7200 =42; CELL 14400 14400 =43; CELL 12000 12000 =44; CELL 9600 9600 =45; CELL 7200 7200T =46; CELL 4800 4800T =47; CELL 4800 4800C =48; CELL 3600 3600C =49; CELL 3600 2400C Note: Not all models support all modes. Check the compatibility table for available modes. S20 DTE speed, default=2 (Auto detected from AT command) =0; 76.8 Kbps. =1; 57.6 Kbps. =2; 38.4 Kbps. =3; 19.2 Kbps. =4; 16.8 Kbps. =5; 14.4 Kbps. =6; 12.0 Kbps. =7; 9.6 Kbps. =8; 7.2 Kbps. =9; 4.8 Kbps. =10; 3.6 Kbps. =11; 2.4 Kbps. =12; 1.8 Kbps. =13; 1.2 Kbps. =14; 600 bps. =15; 300 bps. S21 Bit-mapped register, default =178 &Dn (7,6) =0; Modem ignores DTR signal, assumes DTR always ON. =1; 108.1, DTR OFF-ON transition causes dial of the default number. DTR OFF causes hang-up. =2; 108.2, Data Terminal Ready, DTR OFF causes the modem to hang up and return to command state. =3; 108.2, DTR off causes the modem to hang up and reset the modem to profile 0. &Rn (5) =0; CTS follows RTS in synchronous mode. Response delay set in S26. =1; Ignore RTS (CTS always ON) in synchronous mode. &Cn (4) =0; CD always ON. =1; CD tracks presence of data carrier. (See also S38b3) &Sn (3) =0; Modem forces DSR always ON. =1; According to CCITT. (See also S44b4, S41b5)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
=32;
V.17FAX
14400/12000/9600/7200,
V.29FAX
9600/7200,
V.27terFAX
4800/2400.
=34;
ZyX 19200
19200
=35;
ZyX 16800
16800
=36;
ZyX 14400
14400
=37;
ZyX 12000
12000
=38;
ZyX 9600
9600
=39;
ZyX 7200
7200
=42;
CELL 14400
14400
=43;
CELL 12000
12000
=44;
CELL 9600
9600
=45;
CELL 7200
7200T
=46;
CELL 4800
4800T
=47;
CELL 4800
4800C
=48;
CELL 3600
3600C
=49;
CELL 3600
2400C
Note: Not all models support all modes. Check the compatibility table for available modes.
S20
DTE speed, default=2
(Auto detected from AT command)
=0;
76.8 Kbps.
=1;
57.6 Kbps.
=2;
38.4 Kbps.
=3;
19.2 Kbps.
=4;
16.8 Kbps.
=5;
14.4 Kbps.
=6;
12.0 Kbps.
=7;
9.6 Kbps.
=8;
7.2 Kbps.
=9;
4.8 Kbps.
=10;
3.6 Kbps.
=11;
2.4 Kbps.
=12;
1.8 Kbps.
=13;
1.2 Kbps.
=14;
600 bps.
=15;
300 bps.
S21
Bit-mapped register, default =178
&Dn
(7,6)
=0;
Modem ignores DTR signal, assumes DTR always ON.
=1;
108.1, DTR OFF-ON transition causes dial of the default
number. DTR OFF causes hang-up.
=2;
108.2, Data Terminal Ready, DTR OFF causes the modem to
hang up and return to command state.
=3;
108.2, DTR off causes the modem to hang up and reset the
modem to profile 0.
&Rn
(5)
=0;
CTS follows RTS in synchronous mode.
Response delay set in
S26.
=1;
Ignore RTS (CTS always ON) in synchronous mode.
&Cn
(4)
=0;
CD always ON.
=1;
CD tracks presence of data carrier. (See also S38b3)
&Sn
(3)
=0;
Modem forces DSR always ON.
=1;
According to CCITT. (See also S44b4, S41b5)