ZyXEL U-1496S Plus User Guide - Page 32
DIAL MEMORY menu default is PH0. If DTR
View all ZyXEL U-1496S Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
CELL 9600 AT&N44 CELL 9600 CELL 7200 AT&N45 CELL 7200 CELL 4800T AT&N46 CELL 4800T CELL 4800C AT&N47 CELL 4800C CELL 3600C AT&N48 CELL 3600C CELL 2400C AT&N49 CELL 2400C Note: @: All ZyX modes except ZyX 16800 are available only on Plus models. QUALITY ACTION AUTO RETRAIN AT*Q1 When poor signal quality is detected, automatically retrain. S41.2=1 extends retrain time out to 5 minutes. + ADAPTIVE RATE AT*Q2 When poor signal quality is detected, automatically fall-back to next lower speed. When signal quality is improved, automatically fall-forward to next higher speed. Rate range 19200 bps - 4800 bps. DISCONNECT AT*Q3 When poor signal quality is detected, modem disconnects itself. NO RESPONSE AT*Q0 No response to poor signal quality. DEFAULT DIAL PH0-PH9 AT*D0-9 Default dial pointer. The first phone number displayed in DIAL MEMORY menu (default is PH0). If DTR option 108.1 is active, DTR OFF-ON transition will cause modem to dial the number stored in the memory address selected (memory address 0 to 9). (See also S35b4). DIAL BACKUP + DISABLED AT*B0 Leased line dial backup disabled. PH0-PH8 AT*B1-9 When Leased line cannot to continue operation, the originate mode modem will automatically dial the number stored in the memory address selected. The answer mode modem also needs to select a non-zero memory address to enable answering at the dial-up line during dial backup. (See also S44b2). GUARD TONE (for V.22 and V.22bis answer mode operation) + NONE AT&G0 No guard tone provided. RESERVED AT&G1 Reserved. 1800 HZ AT&G2 1800 Hz guard tone provided. RDL REQUEST GRANT AT&T4 Accepts remote digital loopback test request from remote modem. Must be set when remote configuration is needed.