ZyXEL U-1496S Plus User Guide - Page 98
Nms Capable Models
View all ZyXEL U-1496S Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
controls all the modem cards in the rack and interfaces to central NMS control station. A simple twisted pair wiring can be used to link all the central site racks to a control station which is usually a PC station running the ZyView NMS software under Microsoft Windows. HIERARCHICAL MODEM NETWORK ZyXEL MNMS can control a hierarchical (tree type) modem network. There is a secondary channel that will pass NMS information to and from the remote modem. The NMS information can also pass to a remote site with a tandem connection to the central site as long as the tandem site(s) is a ZyXEL rack. DISTRIBUTED MANAGEMENT Any site with a ZyXEL rack(s) can connect a PC workstation running ZyView and control and monitor all the hierarchical nodes under it. Usually, control down the modem hierarchy is through the secondary channel attached to any existing modem links between modem sites. Alternatively, a dedicated modem link between two sites with racks can be assigned to pass NMS information and it will be much faster than using a secondary channel. Two sites with many racks each can link their NMS in this way. NMS CAPABLE MODELS All ZyXEL rack models are NMS capable but only the model with a "N" suffix (i.e., U-1496RN) has the secondary channel capability. A secondary channel is necessary for remote control and hierarchical control. For a large central site local control, the secondary channel is not needed. Also, for dial-up use, like a couple of racks for a multi-line BBS, remote control and hence a secondary channel is usually not needed. The stand alone LCD model U-1496SN is the U-1496 with a secondary channel. It can be put on the end node of a hierarchical modem network and is remote controllable.