ZyXEL U-1496S Plus User Guide - Page 77
Supported Commands per EIA PN2388 8/20/90
View all ZyXEL U-1496S Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
+= Execute a command or set a parameter +? Read possible settings +=? Read current setting Supported Commands (per EIA PN2388 8/20/90) +FAA=n Auto answer mode parameter n=0 DCE to answer as set by +FCLASS n=1 DCE can answer and auto. determine calling type +FCLASS=n Service class selection n=0 Set to modem mode n=2 Set to Class 2 mode n=6 Set to ZFAX mode n=8 Set to Voice mode +FBOR=n Phase C data bit order n=0 Select direct bit order n=1 Select reversed bit order in receiving mode +FICG="string" Local fax station ID string, for polling Rx. +FCON DCE response, Fax connection made +FCR=n Capability to receive parameter n=0 DCE will not receive message data or poll a remote +FDCC=vr,br,wd,ln,df,ec,bf,st DCE capabilities parameters vr=0 Vertical resolution: Normal; 98 lpi vr=1 Vertical resolution: Fine; 196 lpi br=0 Bit rate: 2400 bit/s; V.27ter br=1 Bit rate: 4800 bit/s; V.27ter br=2 Bit rate: 7200 bit/s; V.29 or V.17 br=3 Bit rate: 9600 bit/s; V.29 or V.17 br=4 Bit rate: 12000 bit/s; V.17 br=5 Bit rate: 14400 bit/s; V.17 wd=0 Page Width: 1728 pixels in 215mm wd=1 Page Width: 2048 pixels in 255mm wd=2 Page Width: 2432 pixels in 303mm ln=0 Page length: A4; 297mm ln=1 Page length: B4; 364mm ln=2 Page length: unlimited length df=0 Data compression format: 1-D; modified Huffman df=1 Data compression format: 2-D; modified Read ec=0 Error correction disabled bf=0 Disable Binary file transfer st=0 Minimum scan time/line 0 ms st=1 Minimum scan time/line 5 ms st=2 10 ms (normal); 5 ms (fine) st=3 Minimum scan time/line 10ms st=4 20 ms (normal); 10ms (fine) st=5 Minimum scan time/line 20ms st=6 40 ms (normal); 20ms (fine) st=7 Minimum scan time/line 40ms +FDCS=vr,br,wd,ln,df,ec,bf,st Current session parameter; refer to +FDCC command +FDIS=vr,br,wd,ln,df,ec,bf,st Current session negotiation parameter; refer to +FDCC command +FDR Receive phase C data command; initiates document reception +FDT=df,vr,wd,in Transmit phase C data command; releases the DCE to proceed with negotiation