2011 Subaru Outback Owner's Manual - Page 114

Keys and doors 2-23 & Power window operation by passengers ! Passenger's side power window switches ! Operating the windows & Initialization of power window If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated. . One-touch auto up/down function . Anti-entrapment function Initialize the power window in the following procedure to reactivate such functions. 1. Close the driver's door. 2. Turn the ignition switch to the "ON" position. 3. Open the driver's side window halfway by pushing down the power window switch. 4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely. Each passenger window can be controlled by the power window switch located on the door. To open: Press the switch down and hold it until the window reaches the desired position. To close: Pull the switch up and hold it until the window reaches the desired position. When the lock switch on the power window switch cluster, located on the driver's side door, is in the lock position, the passengers' windows cannot be operated with the passengers' switches.