2011 Subaru Outback Owner's Manual - Page 210

Audio 5-19 & How to insert a CD (type A) While the ignition switch is in the "Acc" or "ON" position, hold a disc with a finger in the center hole while gripping the edge of the disc, then insert it in to the slot (with the label side up) and the player will automatically pull the disc into position. NOTE DO NOT INSERT TWO DISCS INTO THE DISC INSERTION SLOT AT A TIME. If no indicator blinks, it means that there is no idle position in the magazine. 2. When the "LOAD" indicator illuminates, insert the disc. Once you have inserted the disc, the "LOAD" indicator will turn off and the "LOADING" indicator will illuminate. The disc will then be automatically drawn in, the player will begin to play back the first track of the disc, the "LOADING" indicator will turn off and the "READING" indicator will illuminate. . To insert more discs in succession, repeat steps 1 and 2. The magazine will be loaded with discs in the ascending order of position number. . If you do not insert any disc in 15 seconds after you have pressed the "LOAD" button, the player will return to the original mode that was selected before the "LOAD" button was pressed. . The disc indicator steadily lights up if a disc is already inserted in the corresponding position of the magazine. . While the player is in the loading mode, if you press "FM", "AM" or "SAT" button, the player will enter the standby mode. Press the "CD/AUX" button to start playback. ! Inserting a disc in a desired position & How to insert a CD(s) (type B) 1. Briefly press the "LOAD" button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. The positions in the magazine the indicator of which steadily lights up are already loaded with discs. 1. Briefly press the "LOAD" button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. - CONTINUED -