2011 Subaru Outback Owner's Manual - Page 61

1-38 Seat, seatbelt and SRS airbags 1. Remove the head restraint at the seating position where the child restraint system has been installed with the seatbelt or lower anchorages; lift up the head restraint while pressing the release button. Store the head restraint in the cargo area. Avoid placing the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn. *SRS airbag (Supplemental Restraint System airbag) *SRS: This stands for supplemental restraint system. This name is used because the airbag system supplements the vehicle's seatbelts. Your vehicle is equipped with a crash sensing and diagnostic module, which will record the use of the seatbelt by the front passenger when any of the SRS frontal, side and curtain airbags deploys. 3. Fasten the top tether hook of the child restraint system to the appropriate upper anchorage. 4. Tighten the top tether securely. & Models with SRS airbags and lap/shoulder restraints for driver, front passenger, and window-side rear passengers Your vehicle is equipped with a supplemental restraint system in addition to a lap/shoulder belt at each front seating position and each rear window-side seating position. The supplemental restraint system (SRS) consists of six airbags. The configurations are as follows: . Driver's and front passenger's frontal airbags . Driver's and front passenger's side airbags . Curtain airbags (for driver, front passenger, and window-side rear passen- 2. Open the cover flaps to use the anchorages.