2011 Subaru Outback Owner's Manual - Page 211

5-20 Audio if you press "FM", "AM" or "SAT" button, the player will enter standby mode. Press the "CD/AUX" button to start playback. ! Loading all the magazine (full disc loading mode) 4. When the magazine is filled with discs by repeating steps 2 and 3, the player will start playback of the discs, beginning with the one inserted first. If you fail to insert any disc during each 15 seconds interval, the full disc loading mode will be canceled, and the player will start playback of the disc inserted first. & How to play back a CD NOTE Disc select buttons 2. Press the disc select button at the position where you want to insert a disc. 3. When the "LOAD" indicator illuminates, insert the disc. Once you have inserted the disc, the "LOAD" indicator will turn off. The disc will then be automatically drawn in, and the player will begin to play the first track on the disc. . If you wish to insert another disc, repeat the procedure beginning with step 1. . If you do not insert any disc in 15 seconds after you have pressed the "LOAD" button, the player will return to the original mode that was selected before the "LOAD" button was pressed. . While the player is in the loading mode, For type A audio, if a disc that the player cannot read has been loaded, the player will display the message "CHECK DISC". ! When there is no CD inserted Insert a CD by referring to "How to insert a CD (type A)" F5-19 / "How to insert a CD (s) (type B)" F5-19. When a CD is loaded, the player will start playback of the CD, beginning with the first track. 1. If you continue to press the "LOAD" button for more than 1.5 seconds, the player will produce beep sound and will enter the full disc loading mode. 2. When the disc number indicator flashes and "ALL LOAD" indicator illuminates, insert a disc within 15 seconds. If a disc is successfully loaded during this period, the disc number indicator will stop blinking and will steadily light. 3. When the loading of a disc is complete, the next idle disc number indicator will blink. Then repeat step 2.