2011 Subaru Outback Owner's Manual - Page 333

9-8 In case of emergency 10. Remove the wheel nuts and the flat tire. wheel nuts. Tighten them by hand. WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 13. Turn the jack handle counterclockwise to lower the vehicle. on the wrench because you may exceed the specified torque. Have the wheel nut torque checked at the nearest automotive service facility. 15. Store the flat tire in the spare tire compartment. Put the spacer and tighten the attaching bolt firmly. Also store the jack and jack handle in their storage locations. 14. Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration. For the wheel nut tightening torque, refer to "Tires" F12-5. Never use your foot on the wheel nut wrench or a pipe extension 11. Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 12. Put on the spare tire. Replace the