2011 Subaru Outback Owner's Manual - Page 151

3-30 Instruments and controls Illumination brightness control NOTE . When the control dial is turned fully upward, the illumination brightness becomes the maximum and the automatic dimming function does not work at all. . The brightness setting is not canceled even when the ignition switch is turned to the "LOCK" position. Front fog light switch (if equipped) The illumination brightness of the clock display, audio, air conditioner, multi function display and meter/gauge dims under the following conditions. " or . when the light switch is in the position . when the light switch is in the "AUTO" position and the headlights illuminate automatically You can adjust the illumination brightness for better visibility. To brighten, turn the control dial upward. To darken, turn the control dial downward. The front fog lights operate under the following conditions. . when the light switch is in the " " position . when the light switch is in the "AUTO" position and the headlights turn on automatically However, the front fog lights turn off when the headlights are switched to high beam. To turn on the front fog lights, turn the front fog light switch on the turn signal lever upward to the " " position. To turn off the front fog lights, turn the switch back down to the "OFF" position.